Driving Position Memory System - Toyota 2007 4runner Owner's Manual

06 06.08
CAUTION
D
Do not allow passengers to ride on
the flattened seat while driving; use
the seat in the normal position.
D
After putting back the seat,
pushing the seat and seatback for-
ward and rearward to make sure it
is secured in place. Be certain to
replace the head restraint.
48
Driving position memory
system (on some models)
This system can memorize the position
of the driver's seat and recall it at the
touch of a button.
Buttons "1" and "2" can memorize two
separate positions.
try
CY13300
SETTING THE DRIVING POSITION
The ignition key must be in the "ON" posi-
tion and the selector lever is in the "P"
position.
1. Adjust the driver's seat to the de-
sired position.
2. While pushing the
push button "1" or "2" until a beep
is heard.
The system can memorize up to 2 posi-
tions by repeating the above steps. If step
2 is performed when both buttons "1" and
"2" are memorized, the previous position
will be erased and a new position will be
set.
2007 4Runner from Aug. '06 Prod. (OM35866U)
"SET" button,