Toyota 2007 4runner Owner's Manual page 455

06 06.07
R
(a) Programming the HomeLink
R
The HomeLink in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
R
HomeLink , install a new battery in the
hand−held transmitter prior to program-
ming.
The battery side of the hand−held trans-
mitter must be pointed away from the
R
HomeLink during the programming pro-
cess.
For Canadian users, follow the procedure
in "Programming an entrance gate/pro-
gramming all devices in the Canadian
market".
R
1. Decide which of 3 HomeLink
you want to program.
CY19131
Hand−held
garage
transmitter
2. Place your hand−held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
the surface of the HomeLink
Keep the indicator light on the HomeLink
buttons
in view while programming.
HomeLinkr
CY19132
25 to 75 mm
(1 to 3 in.)
3. Simultaneously
hand−held
R
. along with the selected HomeLink
R
ton.
Do not release the buttons until step 4
has been completed.
4. When the
HomeLink
rapid flash after 20 seconds, you can
release both buttons.
2007 4Runner from Aug. '06 Prod. (OM35866U)
press and hold the
garage transmitter button
R
but-
indicator light on the
R
changes from a slow to a
309