Toyota 2007 4runner Owner's Manual page 351

Hide thumbs Also See for 2007 4runner:

Table of Contents

Replace the battery according to the fol-

lowing procedure:

1. Remove the cover of the controller as

2. Remove the discharged batteries and

put in the new batteries as shown.

Install the cover.

2007 4Runner from Aug. '06 Prod. (OM35866U)

z Be sure that the positive side and

negative side of the controller bat-

tery should be faced correctly.

z Do not replace the battery with wet

hands. Water may cause rust.

z Do not touch or move any compo-

nents inside of the controller, or it

may interfere with proper operation.

z Be careful not to bend the electrode

of the controller battery insertion.

z Close the battery case securely.

After replacing the battery, check that the

controller operates properly. If the control-

ler still does not operate properly, contact

your Toyota dealer.

Show Quick Links

Chapters

Table of Contents