Toyota 2007 4runner Owner's Manual page 159

06 06.08
CAUTION
D
Do not allow passengers to ride on
the flattened seat while driving; use
the seat in the normal position.
D
After putting back the seat,
pushing the seat and seatback for-
ward and rearward to make sure it
is secured in place. Be certain to
replace the head restraint.
—Flattening seatbacks
(power seat)
CY13135
try
1. Remove the head restraint. Move the
seat position adjusting switch for-
ward to slide the seat further for-
ward than the front−most position.
CY13136
2. Move the seatback angle adjusting
switch backward to flatten the seat-
back.
After returning the seat to its original
position, be certain to replace the head
restraint.
2007 4Runner from Aug. '06 Prod. (OM35866U)
47