Toyota 2007 4runner Owner's Manual page 140

06 06.07
If the battery is disconnected or run
down, the power window may not operate
automatically and the jam protection func-
tion will not function correctly after you
reconnect, replace or recharge the battery.
In any of these cases, you should normal-
ize the power window.
To normalize the power window:
1. Push down the power window switch
and lower the window halfway.
2. Pull up the switch until the window
closes and hold the switch for a sec-
ond.
Make sure that the window opens and
closes automatically. If the power window
cannot be operated properly,
checked by your Toyota dealer.
CAUTION
D
Never try jamming any part of your
body to activate the jam protection
function intentionally, as it could re-
sult in death or serious injury.
D
The jam protection function may
not work if something gets caught
just before the window is
closed.
28
CY12052
have it
fully
Window
lock
switch
CY12085
2007 4Runner from Aug. '06 Prod. (OM35866U)