Driving Position Memory System - Toyota Land Cruiser 200 2010 Owner's Manual

1-3. Adjustable components (seats, mirrors, steering wheel)

Driving position memory system

Your preferred driving position (the position of the driver's seat,
steering wheel and outside rear view mirrors) can be entered into the
computer's memory and recalled with the touch of a button. It is also
possible to set this function to activate automatically when the
doors are unlocked.
Three different driving positions can be entered into memory.
■
Entering a position to memory
STEP 1
Turn the "ENGINE START STOP" switch to IGNITION ON
mode.
STEP 2
Adjust the driver's seat, steering wheel, and outside rear
view mirrors to the desired positions.
STEP STEP 3 3
1
2
3
L/C200_U (OM60G31U)
SE T
1
2
3
SET
ITY13C036
While pressing the "SET" but-
ton, or within 3 seconds after
the "SET" button is pressed,
press and hold button "1", "2"
or "3" until the signal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
1
63