Configuring And Using Dynamic (Radius-Assigned) Access Control Lists; Introduction; Radius-Assigned, Dynamic Acls - HP 2530 Manual Supplement

Figure 4 Example displaying rate-limiting for multiple ports (CLI and RADIUS)
Figure 5 Example displaying priority for multiple ports (CLI and RADIUS)

Configuring and using dynamic (RADIUS-assigned) access control lists

Introduction

A RADIUS-assigned ACL is configured on a RADIUS server and dynamically assigned by the server
to filter IP traffic from a specific client after the client is authenticated by the server.
This section describes how to apply RADIUS-assigned ACLs on the switch, and assumes a general
understanding of ACL structure and operation. For information on ACL filtering criteria, design,
and operation, see:
"IPv4 Access Control Lists (ACLs)" in the latest HP Switch Software Access Security Guide for
your switch.
"IPv6 Access Control Lists (ACLs)" in the latest HP Switch Software IPv6 Configuration Guide
for your switch.

RADIUS-assigned, dynamic ACLs

RADIUS-assigned ACLs enhance network and switch management access security and traffic control
by permitting or denying authenticated client access to specific network resources and to the switch
management interface. This includes preventing clients from using TCP or UDP applications, ICMP
packet types, and IGMP (IPv4 only).
36 Updates for the HP Switch Software Access Security Guide