Receiver Setup - Output Settings (Dtv-Rx01-Sd) - AMX TDS Operation/Reference Manual

Digital TV Configuration Manager

Receiver Setup - Output Settings (DTV-RX01-SD)

With a DTV-RX01-SD receiver selected in the Manage Units list, select Output Settings in the Manage
Receivers page to access the options shown in FIG. 85. Use the options in this page to associate a remote
controller and device IR file to each DTV Receiver. The options on this page are specific to DTV-RX01-SD
(standard-definition) receivers.
Use the Upload New IR File option to load a IR Library (*.IRL) file associated with the display device that
will be used with this Receiver and Remote Controller.
FIG. 85 Receiver Setup - Output Settings
The options on the Receiver Setup - Output Settings page for DTV-RX01-SD Receivers include:
Receiver Setup - Output Settings (DTV-RX01-SD)
Manage Unit
• Device List:
• Refresh List:
TV Aspect Ratio
• Picture Aspect
• All Units:
• Save:
70
The Manage Unit window displays a list of all DTV Receivers connected to the Master.
Click to refresh the Receivers list (in the Manage Unit window).
Click the down arrow to select the aspect ratio setting for the selected Receiver.
Select this option to set the selected Picture Aspect setting to all Receivers.
Click to save the current Picture Aspect setting.
AMX TDS (Television Delivery System)