Table of Contents
Advertisement
DTV-RC01 Digital TV Remote Controller
Overview
The DTV-RC01 Digital TV Remote Controller (FG1411-70) allows the user to change the channel and
navigate the available channels (FIG. 67).
FIG. 67
DTV-RC01 Digital TV Remote Controller
Product Specifications - DTV-RC01 Remote Controller
Dimensions (HWD):
Battery:
Rated Supply Voltage: 3Vdc. / CR2032
Each DTV-RC01 is associated with a single DTV-RX02-HD Receiver, via options in the Receiver Setup - IR
Settings page. See the Assigning a DTV-RC01 Remote Controller To a Specific Receiver section on page 51 for
information.
The DTV-RC01 controls the DTV-RX02-HD Receiver via its built-in IR Receiver, or optionally via an
External IR Receiver (60-1411-01, not included).
When installing the DTV Receiver, be sure to position the unit so that IR signals from
the DTV-RC01 can reach the IR Receiver.
The button functions of the DTV-RC01 are described below:
DTV-RC01 Digital TV Remote Controller - Button Functions
• AMX:
• MENU:
AMX TDS (Television Delivery System)
AMX - Displays user-defined Control Menu
MENU - Displays menu options (EPG, sub-titles, language)
GUIDE - Displays the EPG (program list)
EXIT - Exits any on-screen displays
SEL - Select the highlighted option on-screen
INFO - Access detailed program information
F1 - user-programmable (via NetLinx code)
OFF - Powers off/on the local display device
MUTE - Mutes the audio
(#)0-9 - Enter Channel numbers
VOL - Up/Down arrows adjust volume on display device
CH - Up/Down arrows change channels on display device
Red - Page Up (EPG)
Green - Page Down (EPG)
Yellow - user-programmable (via NetLinx code)
Blue - user-programmable (via NetLinx code)
• 3 5/16" x 2 1/8" x 1/4" (3.31" x 2.13" x 0.25")
• 8.41cm x 5.39cm x 0.63 cm
CR 2032 lithium battery
Caution: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Press to access a user-definable (10x10) Control Menu.
Press to access a sub-menu that allows access to the EPG (programming
guide), Subtitles and Audio Language settings.
These options allow the selection of the configured settings made in the TDS
Configuration Menu, and apply only to the Receiver associated with the
DTV-RC01.
DTV-RC01 Digital TV Remote Controller
45
Advertisement
Table of Contents
