OPERATION SETTING - VENTILATION
48
General Ventilation Operation Mode
You can select the ventilation mode when it is connected to a ventilation product.
● Press remote controller screen 1 time to turn on.
- If remote controller operation is not used, screen will go into energy savings mode.
● During the indoor unit operation, press the desired ventilation mode button.
Ventilation mode
It measures the ventilation system's indoor temperature and out-
door temperature to automatically operate in the optimal ventila-
tion mode.
Perform both air supply/discharge ventilation through the heat ex-
changer. Suitable for use in Summer/Winter during large temper-
ature differences between indoor/outdoor.
Used to keep discharged air from entering the heat exchanger.
Used during the Spring/Fall seasons to keep allergens or pollutant
from entering the room.
Function Description
Ventilator with DX(Direct eXchanger) Operation Mode
It uses the heat exchanger inside the ventilation product to perform the ventilation operation
function at the same time of cooling or heating operation.
● Press remote controller screen 1 time to turn on.
- If remote controller operation is not used, screen will go into energy savings mode.
● During the indoor unit operation, press the desired ventilation mode button.
- You can select Auto, Recovery, or Bypass mode.
● During the operation of the indoor unit, press the mode button on the screen.
- You can select Auto, Recovery, or Bypass mode.
● Press the remote controller screen's temperature control button to set the desired temperature.
- In cooling, heating, and automatic mode, you can control the desired temperature.
OPERATION SETTING - VENTILATION
49