Fan Operation In The Cooling Mode And Thermal Off Conditions (Air Conditioner); Primary Heater Control Setting(Air Conditioner) - LG V-NET ACS PREMTA000A Installation And User Manual

INSTALLER'S SETTING OPTIONS
186
Fan operation in the cooling mode and thermal off conditions
(air conditioner)
It is a function that sets the indoor unit fan movement, in cooling mode, when thermal is off.
● Press and hold 'wireless remote controller signal receiver part' of the remote controller for
3seconds or longer to enter the installer function.
● Select remote controller code value '35'.
- You can press '▲', '▼' button to change the code value.
● In value1, use '▲', '▼' button to select setting value, and press 'Done' button to complete set-
ting.
- If you do not press 'Done' button, the setting value will not be applied.
Fan operation in the cooling mode
Value
and thermal off conditions
0 Fan speed Low
1 Fan off
2 Fan speed Setting value

Primary Heater control setting(air conditioner)

It is a function that sets the outdoor unit to operate with auxiliary heat source and the heater to
run with main heat source in heating mode.
● Press and hold 'wireless remote controller signal receiver part' of the remote controller for
3seconds or longer to enter the installer function.
● Select remote controller code value '36'.
- You can press '▲', '▼' button to change the code value.
● In value1, use '▲', '▼' button to select setting value, and press 'Done' button to complete set-
ting.
- If you do not press 'Done' button, the setting value will not be applied.
Value Primary Heater control setting
000 Cancel primary heater control
001 Use primary heater control
INSTALLER'S SETTING OPTIONS
187