Sub Function Setting; Plasma Purification Setting - LG V-NET ACS PREMTA000A Installation And User Manual

WIND SETTING
30
● Press 'Save' button to save the vane angle setting.
- If you exit without pressing the Save button, changed value will not be applied.
- When you press the Save button, only the values currently displayed on the screen will be ap-
plied. Example) Select vane 1 → Change angle → Save → Select vane 3 → Save
- Verify by sight that the new vane angle setting has been applied. If the vane angle stays at
the original (pre-setting change) angle, your changes were not saved through the screen dis-
play.
● Set the vane angles of the remaining vanes using the same procedure as above.
- Depending on the model of your indoor unit, you may only have 1 or 2 vane settings that can
be applied (i.e., 1-way or 2-way cassettes).
● If you press 'Back', 'Go Back', or 'Home' button, it will exit from the setting menu.
- If there is no button input for about 60 seconds, it automatically exits from the setting menu.

SUB FUNCTION SETTING

Plasma Purification Setting
Improves indoor air quality
● During the product operation, press the screen's 'additional function menu' button.
- It moves to additional function selection screen.
● In Additional Function Setting screen, press 'Plasma Purification', 'OFF/ON' button to activate
or turn off the desired function.
SUB FUNCTION SETTING
31