Operation - AEG 37699MO-MN User Manual

8 www.aeg.com
Minute counter (from 0.01 to 0.59 =
hh,mm)
Press push button 1 and select cooking
time with push button 5 or 6. The
symbol turns on. At the end of the set
time the buzzer will go off and the
symbol turns off.
Semi-automatic operation
(with cooking time from 0.01 to 23.59
= hh,mm)
By pressing push button 2 and setting
the length of cooking time with push
button 5 or 6, the AUTO and symbols will
light up and stay on all the time. At the
end of the set time the
turn off, the AUTO symbol will flash and
the buzzer will go off.
Semi-automatic operation
(with end of cooking time from 0.01 to
23.59 = hh,mm)
By pressing push button 3 and setting
the end of cooking time with push
button 6, the AUTO and symbols will turn
on and stay on all the time. At the end
of the set time the
off, the AUTO symbol will flash and the
buzzer will go off.
Automatic operation
(with the start of cooking time
delayed)
First programme cooking time (both
the AUTO and
and then the end of cooking time (the
symbol will turn off) as described
previously. The
again when baking in the oven starts. At
the end of cooking time the
will turn off, the AUTO symbol will flash
and the buzzer will go off.
symbol will
symbol will turn
symbol will turn on)
symbol will turn on
symbol
Manual operation
Manual operation is only possible when
the automatic programming has finished
or after having cancelled it by pressing
push button 4. The AUTO symbol
disappears and the
Buzzer
The buzzer will go off at the end of a
programme or at the end of the minute
counter function and lasts about 7
minutes. The buzzer can be stopped
by pressing one of the function push
buttons.
Programme start and control
The programme starts after setting. The
programme set can be controlled at any
time by pressing the corresponding push
button.
Correcting/cancelling the programme
setting
An automatic function programming
error will occur if the time shown on the
clock is between the cooking start time
and cooking end time. This error will be
signalled immediately by a buzzer and
the AUTO symbol will flash. A setting
error can be corrected by altering the
duration or end of cooking time. Any
programme that has been set can be
corrected at any time by pressing the
corresponding programming key and
then key 5 or 6. To cancel a programme,
correct the time set bringing it to a
value of "0.00". If functioning time is
cancelled the end of functioning is
cancelled too and vice versa. The oven
turns off automatically and the AUTO
symbol flashes. Press key 4 to set the
programmer on manual operation. The
right time cannot be corrected when
the automatic operation programme is
working.
symbol turns on.