Uconnect 8.4 NAV Supplemental Owner's Manual page 82

• Your device must be compatible with the Uconnect
Access App and properly connected to the vehicle.
• To perform updates to this application, if required,
your vehicle must be connected to an operable 1X
(voice/data) or 3G (data) network.
• Your device must be connected to a mobile network.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the appli-
cable feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning elec-
trical system.
• Vehicle must be equipped with Uconnect 8.4A/8.4AN.
ALL ABOUT UCONNECT ACCESS 81
FAQs
1. Why can't I get Slacker Radio Via Mobile to work?
Here are some things to consider:
• Check to ensure you have linked your Slacker Radio
account credentials with Uconnect Access. This is
usually done during registration and setup. Then,
check to ensure you have properly connected your
compatible device to the vehicle touchscreen. The
Uconnect Access App must be open and you must be
logged in. A blue light indicates that it's providing
data to the vehicle.
• If you recently changed your password for Slacker
Radio, it may need to be updated on Mopar Owner
Connect under the "Via Mobile" section.
3