Uconnect 8.4 NAV Supplemental Owner's Manual page 224

• Units
When in this display, the odometer, and navigation
system (if equipped) may be changed between US and
Metric units of measure. Press "US" or "Metric" to make
your selection.
• Touchscreen Beep
When in this display, you may turn on or shut off the
sound heard when a touchscreen button (button on the
touchscreen) is pressed. Press the "Touchscreen Beep"
button on the touchscreen until a check-mark appears
next to the setting, showing that setting has been
selected.
• Control Screen Time-Out — If Equipped
When this feature is selected, the Controls Screen will
stay open for five seconds before the screen times out.
With the feature deselected, the screen will stay open
until it is manually closed. Press the Control Screen
Time-Out button on the touchscreen until a check-mark
appears next to the setting, showing that setting has been
selected.
• Navigation Next Turn Pop-ups Displayed In Cluster
— If Equipped
When this feature is selected, the turn-by-turn directions
will appear in the display as the vehicle approaches a
designated turn within a programmed route. To make
your selection, press the "Navigation Turn-By-Turn In
Cluster" button on the touchscreen, until a check-mark
appears next to the setting, showing that setting has been
selected.
• Fuel Saver Display In Cluster
The "ECO" message is located in the instrument cluster
display, this message can be turned on or off. To make
your selection, press the "Fuel Saver Display" button on
the touchscreen, until a check-mark appears next to the
setting, showing that setting has been selected.
UCONNECT SETTINGS 223
5