Uconnect 8.4 NAV Supplemental Owner's Manual page 69

68 ALL ABOUT UCONNECT ACCESS
• From
the Mopar
(moparownerconnect.com).
• Contacting Uconnect Care.
If you want, you can set-up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to turn on the horn and lights.
How It Works
1. Download the Uconnect Access App to a compatible
device and login using your username and password.
2. To turn on the horn and lights, press the "trumpet
icon." To turn-off the horn and lights, press the
"trumpet icon" again.
3. A pop-up screen will appear asking for your Uconnect
Security PIN (this is the same 4- digit code established
when your registered your Uconnect Access system).
Enter the Uconnect Security PIN on the keypad and
press "OK."
Owner Connect website 4. The Uconnect Access App will confirm if your com-
mand was sent (or not). Press "OK" to close the
pop-up screen.
5. It will take a little while for the command to go
through to your vehicle. The time it takes depends on
a number of technical conditions.
6. A message will appear on the screen to let you know
if the command was received by your vehicle.
Mopar Owner Connect website:
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect
Access system.
• If you forgot your username or password, links are
provided on the website to help you retrieve them.