Uconnect 8.4 NAV Supplemental Owner's Manual page 143

142 UCONNECT 8.4A/8.4AN
NOTE: The Uconnect Phone compatible phones in the
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only answer an incoming call or ignore it.
Place/Retrieve A Call From Hold
During an active call, press the "Hold" button on the
Phone main screen.
Making A Second Call While Current Call Is In
Progress
You can place a call on hold by pressing the "Hold"
button on the Phone main screen, then dial a number
from the dialpad, recent calls, SMS Inbox or from the
phonebooks. To go back to the first call, refer to "Toggling
Between Calls" in this section. To combine two calls, refer
to "Join Calls" in this section.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the "Swap" button on the Phone main screen. Only
one call can be placed on hold at a time.
You can also push the Phone
tween the active and held phone call.
Join Calls
When two calls are in progress (one active and one on
hold), press the "Join Calls" button on the Phone main
screen to combine all calls into a Conference Call.
Call Termination
To end a call in progress, momentarily press the Phone
"End" button on the touchscreen or the Phone
"End" button on the steering wheel. Only the active
call(s) will be terminated and if there is a call on hold,
it will become the new active call.
button to toggle be-