• SAFETY GUIDELINES ....... .4 • SAFE USAGE OF THE UCONNECT SYSTEM ....4...
Page 5
• Read all instructions in this manual carefully clean the touchscreen. related to the use of the Uconnect before using your system to ensure proper features and applications in this ve- • If necessary, use a lint-free cloth dampened usage! hicle.
Page 6
FCC Declaration Safety Information This device complies with Part 15 of the FCC Exposure to Radio Frequency Radiation Rules. Operation is subject to the following two The radiated output power of the internal wire- conditions: (1) this device may not cause harm- less radio is far below the FCC radio frequency ful interference, and (2) this device must accept exposure limits.
IDENTIFYING YOUR RADIO • IDENTIFYING YOUR RADIO ......8 • CYBERSECURITY ........10...
Page 9
IDENTIFYING YOUR RADIO The 8.4 NAV sets itself apart by offering these unique features: Uconnect 8.4/8.4 NAV • Navigation Standard • One-shot destination entry • 3D content (Select this option and zoom to an appropriate level. Not all tall buildings are in •...
Page 10
1 — Uconnect Phone Button 6 — Volume Knob/Mute Button 2 — Uconnect Voice Command Button 7 — Uconnect 8.4 NAV Radio 3 — Phone Hang Up Button 8 — Tune or Scroll Knob/Browse or Enter Button 4 — Steering Wheel Audio Controls (Left Rear Surface of Steering Wheel) 9 —...
Page 11
Uconnect software updates. wireless communications. Vehicle software • ONLY insert media (e.g., USB, SD card, • Only connect and use trusted media de-...
4. Apps UCONNECT 8.4/8.4 NAV PERSONALIZED MENU BAR SYSTEM The Uconnect features and services in the main Press the “Apps ” button — If Equipped to menu bar are easily changed for your conve- access Apps. nience. Simply follow these steps: 5.
Push the VOLUME And On/OFF control knob to touchscreen to the right and left of the radio Direct Tune turn on and off the Uconnect system. station display, or by pressing the left “Steering Wheel Audio Control” (if equipped) up or down.
Undo Browse in FM/AM/MW/LW/SW/DAB/DAB+/ Audio Press the “Audio” button on the touchscreen to You can backspace an entry by pressing the activate the Audio settings screen to adjust bottom left “Undo” button or the button on the When in any radio mode, the Browse Screen Balance/Fade, Equalizer, Speed Adjusted Vol- touchscreen.
Page 17
Equalizer Speed Adjusted Volume AUX Volume Offset Press the “Equalizer” button on the touchscreen Press the “Speed Adjusted Volume” button on to activate the Equalizer screen. the touchscreen to activate the Speed Adjusted Volume screen. Press the “+” or “–” buttons, or by pressing and dragging over the level bar for each of the The Speed Adjusted Volume is adjusted by equalizer bands.
The right-hand control is a rocker-type switch current track, or to the beginning of the previous The AUX Volume Offset is adjusted by pressing of the “+” and “–” buttons. This alters the AUX with a push-button in the center and controls the track if it is within eight seconds after the current input audio volume.
the beginning of the previous selection if the browse through the contents of the Disc. If Info supported by the device, you can browse by USB device/iPod is within the first three seconds Press the “Info” button on the touchscreen to Folders, Artists, Playlists, Albums, Songs, etc.
Press the “Shuffle” button on the touch- Inserting Auxiliary Device screen a second time to turn this feature off. be paired to the Uconnect Phone to communi- Gently insert the Auxiliary device cable into the cate with the Uconnect System.
Call logs. result in an accident involving seri- Uconnect Phone allows you to dial a phone • Reviewing your recent Incoming SMS. ous injury or death. number with your mobile phone. • Listen to Music on your Bluetooth Device via...
Help Command The Uconnect Phone is fully integrated with the mand form voice command “Search for John If you need assistance at any prompt, or if you vehicle’s audio system. The volume of the Smith,”...
Page 23
• Select Bluetooth and ensure it is enabled. be connected to the Uconnect system at a time. the system is listening for a command and be If “No” is selected, simply select “Uconnect”...
Page 24
5. When the pairing process has successfully 6. Uconnect Phone will display an in process 4. Press the “X” to exit out of the Settings completed, the system will prompt you to screen while the system is connecting. screen. choose whether or not this is your favorite 7.
Page 25
The changes are transferred and up- To Remove A Favorite phone, Uconnect Phone automatically down- dated to Uconnect Phone on the next phone loads names (text names) and number entries 1. To remove a Favorite, select “Contacts” from connection.
1. Push the Phone button on your steering on your steering wheel to send a touch-tone. If the Uconnect Phone if the feature(s) are avail- wheel to begin. your vehicles has three buttons on the steering able and supported by Bluetooth on your mobile 2.
Page 27
Making A Second Call While Current Call Is text messages while you were using Do Not In Progress The Uconnect Phone will call the last number Disturb. You can place a call on hold by pressing the that was dialed from your mobile phone.
• Low-To-Medium Blower Setting Transfer Call To And From Mobile Phone Far End Audio Performance The Uconnect Phone allows ongoing calls to be • Low-To-Medium Vehicle Speed Audio quality is maximized under: transferred from your mobile phone to the •...
Android Auto Android Auto may use cellular data and your cellular coverage Android Auto is a feature of your Uconnect is shown in the upper right corner of the radio system, and your Android 5.0 Lollipop, or higher, screen.
Page 30
Maps NOTE: If you are using the native Uconnect https://support.google.com/android Push and hold the VR button on the steering navigation system, and you try and start a new https://support.google.com/androidauto/ wheel or tap the microphone icon to ask Google route using the Android Auto, via voice or any Music to take you to a desired destination by voice.
Communication Apple CarPlay Integration With Android Auto connected, press and hold Uconnect works seamlessly with Apple CarPlay, the VR button on the steering wheel to activate the smarter, more secure way to use your voice recognition specific to the Android Auto.
Page 32
Once CarPlay is up and running on your Phone Uconnect radio, the following features can be utilized using your iPhone’s data plan: With CarPlay, press and hold the VR button on • Phone the steering wheel to ac- •...
• If you are using the native Uconnect navi- Alternatively, choose a must be signed in to the app. Refer to http:// gation system, and you try and start a new Nearby destination by www.apple.com/ios/carplay/ to see the latest...
Page 34
Android Auto uses both Bluetooth and initially connected to the USB media port. This USB connections to function, and the connected feature can be turned on and off in the Uconnect device will be unavailable to other devices when Settings, within the Display Settings category.
NAVIGATION location and save any Emergency facility Address location to your Favorites. Press this button on the touchscreen to search Main Menu • Press the search bar at the top of the screen by a street address or a street name with house To access the Navigation system, press the to search for a specific address to program a number.
Page 36
Home Trails Press this button on the touchscreen to program Press the “Trails” button on the touchscreen and or confirm a route to the saved home address. select the option to start trail recording to track the route you are driving. Select the option to Work "stop trail recording"...
Page 37
3. Select the desired location from the list of NOTE: You can press the “back arrow” button locations that appears. Once the correct loca- on the touchscreen to return to the previous tion has been selected, you will be asked to screen or the “X”...
Page 38
• Phone Number Where To? — Recent To route to a Recent destination, follow these • Move Up steps: • Move Down 1. While in the Nav Main Menu, press the • Place Pin (saves the spot on the list) “Where To?”...
Page 39
The following Options are available for each favorite destination: • Edit Name • Phone Number • Move Up • Move Down • Delete If you are currently on a route guidance and you select a Favorite, the system will ask you to choose one of the following: •...
Page 40
You can also change your POI search area, by NOTE: You can press the “back arrow” button 2. Press the “Search By Name” button on the pressing any of the category buttons on the on the touchscreen to return to the previous touchscreen.
Page 41
3. A keyboard will appear on the screen. Type in POI — POI Categories the POI that you want to search and press the To select a POI type, follow these steps: “List” button on the touchscreen to display avail- 1.
Page 42
• Parking 4. Press the desired POI and press “Route To” to confirm the route. • Parks and Recreation 5. Press the “GO!” button to confirm the desti- • Restaurants nation and begin the route. • Shopping If you are currently on a route guidance and you •...
Page 43
You can search for a restaurants by the follow- POI — Hotels/Motels ing categories, which are button tabs at the top To select a Hotel or Motel POI, follow these of the screen. steps: • Name 1. While in the Nav Main Menu, press the •...
Page 44
If you are currently on a route guidance and you You can search for a gas station by the following select a Hotel or Motel, the system will ask you categories, which are button tabs at the top of to choose one of the following: the screen.
Page 45
Within “Add to Current Route” you can add Within “Add to Current Route” you can add destination into your current route, or set the destination into your current route, or set the destination as your final destination. destination as your final destination. NOTE: You can press the “back arrow”...
Page 46
Within “Add to Current Route” you can add To add a Trip, follow these steps: the destination to the current route, or set it 1. Press the “Create New Trip” button on the as the final destination. touchscreen. NOTE: You can press the “back arrow” button 2.
Page 47
To delete a Trip from the list, press the “Gear Icon” button on the touchscreen and then select “Delete” from the pop-up menu. To display the options for a trip press the “Gear Icon” button on the touchscreen. The following Options are available for each trip: •...
Page 48
If you are currently on a route guidance and you 3. Once your cross is where you want it, press select a Intersection, the system will ask you to “Route To”, or select “Places Nearby” to select a choose one of the following: nearby destination.
Page 49
Where To? — Home 3. Press the “Save Home” button on the touch- If there is no Work Address entered, press “Yes” To enter your Home Address, follow these steps: screen to confirm your destination and begin the to enter it now. route to your Home Address.
Page 50
Where To? — City Center Where To? — Closest Cities To enter a destination by City Center, follow To enter a destination by Closest City, follow these steps: these steps: 1. While in the Nav Main Menu, press the 1. While in the Nav Main Menu, press the “Where To?”...
Page 51
Where To? — Phone If you are currently on a route guidance and you To enter a destination by Phone number, follow select a Phone number destination, the system these steps: will ask you to choose one of the following: •...
Page 52
2. Enter the Latitude by typing in the numbers. Within “Add to Current Route” you can add Use the dial pad to select specific numbers in the destination to your current route, or set it the location shown. as your final destination. NOTE: You can press the “back arrow”...
Page 53
Before Route Guidance Before confirming the destination with the “GO!” button on the touchscreen, it is possible to select options different from the default route settings. • Route Options – Press the “Route Options” button on the touchscreen to display a list of options to alter your route.
• 2D North Up/Map View 2D/Map View 3D touchscreen to view the GPS information. Zoom In +/Zoom Out – (3D Available On 8.4 NAV) • Press the “Save” button on the touchscreen Press the “Zoom In (+) or Zoom Out (–)” buttons to save the location in your Favorites.
Page 55
The following Map Settings are available: You can press the “back” arrow button on the touchscreen to return to the previous screen or • Map Setup — Press this button on the touch- the “X” button on the touchscreen to exit. screen to display items to customize how your map is viewed.
Page 56
• Units — If Equipped — Press this button on the touchscreen to change the units display. Press the desired button on the touchscreen. U.S. (mile/feet) Imperial (mile/yard) Metric (meter) • GPS (DMS) — Press this button on the touchscreen to change the GPS display. Press the desired button on the touchscreen.
Page 57
• 3D (3D Map View Is Only Available On Auto Zoom Traffic Incidents – If Equipped Uconnect 8.4 NAV. Must Select 3D City Mod- Press this button on the touchscreen to change Press this button on the touchscreen to show...
Page 58
Digital Terrain Model (8.4 NAV Only) You can press the “back arrow” button on the screen until a check-mark appears, showing the touchscreen to return to the previous screen or setting has been selected. Press this button on the touchscreen to display the “X”...
• Use Real Time Traffic while in route guidance. Press and release the NOTE: You can press the “back arrow” button on desired selection button on the touchscreen the touchscreen to return to the previous screen or Press this button on the touchscreen to display until a check-mark appears, showing the setting the “X”...
Page 60
Information — Weather Information — Where Am I? Information — Trip Computer To select Weather information, follow these To select “Where Am I?” information, follow To select “Trip Computer” information, follow steps: these steps: these steps: 1. While in the Nav Main Menu, press the 1.
• Maximum speed 3. Select the desired country on the touch- Press the “Where Am I?” button on the touch- screen. Information, such as average speed screen to display your exact current location. • Total time traveled limits and specific phone number country codes, Press the “Save”...
Page 62
• Add to Current Route Within “Add to Current Route” you can add the destination to your current route, or set it as your final destination. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X”...
• Add to Current Route • Add to Current Route Within “Add to Current Route” you can add Within “Add to Current Route” you can add the destination to your current route, or set it the destination to your current route, or set it as your final destination.
Page 64
3. Or, if you wish, you can also visit your dealer or place a phone call to request your Map Update. US/CAN General Consumer Support: 888-628-6277 FCA US LLC Dealer Garmin Support: 877-628-4480 FCA US LLC Consumer FreshMaps 866-422-8171...
Page 67
” button on the touchscreen, then press the “Settings ” button on the touchscreen to display the menu setting screen. In this mode, the Uconnect system allows you to access all of your programmable features. NOTE: • Only one touchscreen area may be se- lected at a time.
INTRODUCING UCONNECT GET STARTED Start using Uconnect Voice Recognition with All you need to control your Uconnect system these helpful quick tips. It provides the key Voice with your voice are the buttons on your steering Commands and tips you need to know to control wheel.
The basic Voice Commands below can be given Use your voice to quickly get to the AM or FM prompts to switch your media source or choose at any point while using your Uconnect system. radio stations you would like to hear. an artist.
Making and answering hands-free phone calls is vehicle. Voice Command will not work to adjust easy with Uconnect. When the Phonebook but- the heated seats or steering wheel if equipped. ton is illuminated on your touchscreen, your system is ready.
US LLC. Android is a trademark of Google Inc. 8.4 system.) 1. To enter a destination, push the VR button . After the beep, say: • For the 8.4 Uconnect System, say: “Enter state.” • For the 8.4 NAV Uconnect System, say: “Find address 800 Chrysler Drive Auburn Hills, Michigan.”...
Page 74
ارة ا در Find nearest Set driver temperature to degrees Set passenger temperature to degrees ا ت إ .( " )إد ل دوEnter state" "Find address ان ا ر "ا...
Page 75
ا ً Call Dial Redial Call back Change source to ً "Call" Change source to work Call Change source to ا Play album Play artist Play song Play genre...
Page 76
ا ا ا وا Help Cancel Help Repeat ا اد إ إ...