Uconnect 8.4NAV Owner's Manual
  1. Manuals
  2. Brands
  3. Uconnect Manuals
  4. Radio
  5. 8.4 NAV
  6. Owner's manual
Uconnect 8.4NAV Owner's Manual

Uconnect 8.4NAV Owner's Manual

Hide thumbs Also See for 8.4NAV:
Table of Contents

Advertisement

Quick Links

UCONNECT 8.4/8.4NAV
OWNER'S MANUAL
SUPPLEMENT

Advertisement

Table of Contents
loading

Related Manuals for Uconnect 8.4NAV

Summary of Contents for Uconnect 8.4NAV

  • Page 1 UCONNECT 8.4/8.4NAV OWNER’S MANUAL SUPPLEMENT...

  • Page 2: Table Of Contents

    ALL ABOUT UCONNECT ACCESS ........

  • Page 4: Safety Guidelines

    SAFETY GUIDELINES CONTENTS SAFETY GUIDELINES ....4...
  • Page 5 Only use to a level that still allows you to hear outside traffic Uconnect when it is safe to do so. Failure to do so and emergency vehicles. may result in an accident involving serious injury or death.
  • Page 6 SAFETY GUIDELINES 5 • Permanent hearing loss may occur if you play your • Do not spray any liquid or caustic chemicals directly music or the system at loud volumes. Exercise caution on the screen! Use a clean and dry micro fiber lens when setting the volume on your system.

  • Page 8: Identifying Your Radio

    IDENTIFYING YOUR RADIO CONTENTS IDENTIFYING YOUR RADIO ....8 CYBERSECURITY ......9...
  • Page 9 • Touchscreen Climate Controls • SiriusXM Satellite Radio with 1 year Trial Included — If Equipped • Uconnect Access — U.S. Market Only — If Equipped The 8.4AN sets itself apart by offering these unique features: • HD Radio — U.S. Market Only •...

  • Page 10: Cybersecurity

    Your vehicle may be a connected vehicle and may be vehicle systems may still exist, even if the most recent equipped with both wired and wireless networks. These version of vehicle software (such as Uconnect software) is networks allow your vehicle to send and receive infor- installed.
  • Page 11 For further information, refer to “Privacy Prac- including safety related systems, could be im- tices – If Equipped with Uconnect 8.4 radio” in “All paired or a loss of vehicle control could occur that About Uconnect Access” in your Owner’s Manual Radio may result in an accident involving serious injury Supplement and “Onboard Diagnostic System (OBD II)

  • Page 12: All About Uconnect Access

    INTRODUCTION TO UCONNECT ACCESS . . .13 ▫ What Is Uconnect Access? ....13 USING UCONNECT ACCESS ....24 ▫...
  • Page 13 DEVICE CONNECTION AND AUDIO TIPS WITH UCONNECT ......94 ▫ How To Remove My Uconnect Access Account .84...

  • Page 14: Introduction To Uconnect Access

    Uconnect features and applications in this vehicle. Only use Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury or death.
  • Page 15 NOTE: Voice Texting through Uconnect Access is avail- able for Android phones only. iPhone texting is sup- • The ability to remotely lock/unlock your doors and ported with Siri and does not require a Uconnect Access start your vehicle (if equipped) from virtually any- subscription.
  • Page 16 ALL ABOUT UCONNECT ACCESS 15 2. The Uconnect “Apps” Button On The Menu Bar Of The In-Vehicle Touchscreen This is where you can begin registration for Uconnect Access, find the Apps and purchase WiFi Hotspot on demand. 3. The Uconnect Voice Command And Uconnect Phone...

  • Page 17: All About Uconnect Access 11

    16 ALL ABOUT UCONNECT ACCESS 1 — Uconnect Phone Button 7 — Uconnect Access 8.4AN Radio 2 — Uconnect Voice Command Button 8 — Back Button 3 — Phone Hang Up Button 9 — Tune or Scroll Knob/Browse or Enter Button 4 —...

  • Page 18: Included Trial Period For New Vehicles

    Included Trial Period For New Vehicles ship. Your new vehicle may come with an included trial period for use of the Uconnect Access Services starting at the date of vehicle purchase. To activate the trial, you must Included Trial on New Vehicles ONLY Radio Uconnect 8.4A...
  • Page 19 • Both the Uconnect 8.4A and Uconnect 8.4AN feature a large 8.4 inch full color touchscreen. • Only the Uconnect 8.4AN will have the HD Radio icon when listening to FM or AM stations. The icon will be lit when it is receiving an HD Radio signal (not all...

  • Page 20: Features And Packages

    After the trial period, you can subscribe to continue your service by visiting the Uconnect Store located within the Mopar Owner Connect website (moparownerconnect.com). If you need assistance, you can also call Uconnect Care at: 1-855-792-4241 For the latest information on packages and pricing infor- mation, visit DriveUconnect.com.

  • Page 21: Download The Uconnect Access App

    Mobile App To link your internet radio accounts: 1. Download the Uconnect Access App to your mobile device. 2. Press the Via Mobile icon on the navigation bar at the bottom of the App.

  • Page 22: Purchasing Apps And Wifi Hotspot For Your Vehicle

    Purchasing Apps And WiFi Hotspot For Your Vehicle 4. Enter your login information for the selected App and Apps and WiFi Hotspot can be purchased from the Uconnect press Link. Store from within your vehicle, and online at the Mopar 5.
  • Page 23 Other vehicles you own may not have Uconnect Ac- the “Add New Vehicle” button. Likewise, if a vehicle is cess and will indicate that it is a non-Uconnect Access shown that you no longer own click on the “Edit Vehicle.
  • Page 24 UconnectPhone.com. For more details, see the section corner of the page. labeled Download the Uconnect Access App. 3. Click the Uconnect Notifications tab on the left side of • Learn & Use: the page. Click on the “Learn & Use” tab to find user guides and 4.

  • Page 25: Using Uconnect Access

    24 ALL ABOUT UCONNECT ACCESS • Uconnect Access via Mobile (if equipped) — uses the 6. If you add a mobile phone number, you will receive a confirmation text message asking to confirm and Uconnect Access App and your device’s data plan to receive vehicle notifications.

  • Page 26: 9-1-1 Call

    ALL ABOUT UCONNECT ACCESS 25 App Manager NOTE: Most Uconnect Access features do not require that you have a compatible device. The Uconnect Access Press the “App Manager” button to access the following features must have an operable 1X (voice/data) or 3G...
  • Page 27 Uconnect Access In-Vehicle Assistance Features With Uconnect Access, your vehicle has on-board assis- tance features located on the rear view mirror designed to enhance your driving experience if you should ever need...
  • Page 28 ALL ABOUT UCONNECT ACCESS 27 • The last known GPS coordinates of the vehicle. NOTE: • In case the “9-1-1” Call button is accidentally 3. You should be able to speak with the 9-1-1 operator pushed, there is a 10 second delay before the 9-1-1 through the vehicle audio system to determine if call is placed.
  • Page 29 28 ALL ABOUT UCONNECT ACCESS • The vehicle’s electrical systems are not intact. If the 9-1-1 Call system detects a malfunction, any of the following may occur at the time the malfunction is • The 9-1-1 Call system software and/or hardware is detected: damaged during a vehicle crash.
  • Page 30 U.S. an operable 1X (voice/data) or 3G (data) network. • Vehicle must be properly equipped with the Uconnect If your vehicle loses battery power for any reason (in- Access System. cluding during or after an accident) the 9-1-1 Call System, •...
  • Page 31 IF YOUR VEHICLE LOSES POWER FOR ANY REASON (INCLUDING DURING OR AF- (Continued) TER AN ACCIDENT) THE UCONNECT FEA- TURES, APPS AND SERVICES AMONG OTHERS WILL NOT OPERATE. (Continued)
  • Page 32 ALL ABOUT UCONNECT ACCESS 31 WARNING! (Continued) WARNING! (Continued) • The Occupant Restraint Controller (ORC) turns on • If anyone in the vehicle could be in danger (e.g., the Air Bag Warning Light on the instrument panel fire or smoke is visible, dangerous road conditions...

  • Page 33: Roadside Assistance Call

    32 ALL ABOUT UCONNECT ACCESS 2. What Type Of Information Is Sent When I Call 9-1-1 Roadside Assistance Call From My Vehicle? Certain vehicle information, such Easy Call To Roadside Assistance 24/7 Using ASSIST as make and model, is transmitted along with last Button known GPS location.
  • Page 34 • Uconnect Care — In vehicle support for Uconnect assistance or support. Access System, Apps, and Features.
  • Page 35 34 ALL ABOUT UCONNECT ACCESS Requirements • This feature is available only on vehicles sold in the U.S. • Vehicle must be properly equipped with the Uconnect Access System. • Vehicle must have an operable 1X (voice/data) or 3G (data) network connection.

  • Page 36: Yelp

    Uconnect Care or Vehicle Care, whether such conversa- tions are initiated through the Uconnect Services in your 2. If I Am Subscribed To Uconnect Access, Does It vehicle, or via a landline or mobile device, and may share Cover Towing Or Other Expenses Incurred By Using...
  • Page 37 Now with • With one press, select from the list to find location Uconnect Access, Yelp has been adapted for your vehicle, and on the go capability. Yelp gives you the ability to...
  • Page 38 3. Uconnect will prompt you to say something like, “car wash.” After the beep, say “restaurants.” 4. The Uconnect system will link out to the cloud to do your Yelp search, and depending on your search request, this may take up to 30 seconds.
  • Page 39 Only use Uconnect when it is safe to do so. Failure to do so • Vehicle must be registered with Uconnect Access and may result in an accident involving serious injury have an active subscription that includes the appli- or death.

  • Page 40: Security Alarm Notification

    ALL ABOUT UCONNECT ACCESS 39 • If you wish to cancel a search request, press “Cancel.” Security Alarm Notification • To learn more about a listing, press the line that Notifies you via email or text message (SMS) when the vehicle’s factory-installed theft alarm system has been...
  • Page 41 40 ALL ABOUT UCONNECT ACCESS How It Works 4. If you have more than one vehicle with Uconnect Access, please select which vehicle you want to man- Theft Alarm Notification can send you an email or text age notifications for using the drop down menu.
  • Page 42 ALL ABOUT UCONNECT ACCESS 41 Requirements CAUTION! • Vehicle must be properly equipped with the Uconnect In the event your theft alarm is activated, use Access System and a factory installed Theft Alarm caution and evaluate the situation from a safe system.

  • Page 43: Stolen Vehicle Assistance

    Uconnect Care can help locate your vehicle. The Uconnect Care Agent will ask for the stolen vehicle report 3. Can I receive a text message (SMS) when my Theft number issued by local law enforcement. As long as your Alarm goes off? Yes.
  • Page 44 4. Uconnect Care will work with your local law enforce- How It Works ment to track and attempt to recover the vehicle. You will be contacted by law enforcement if your vehicle is 1.
  • Page 45 They will work with 3. How will I know if my vehicle is recovered? After you to file a stolen vehicle report. Then call Uconnect you provide the Uconnect Care Agent with the stolen Care at: vehicle report, the agent will work together with law enforcement to try to locate your vehicle.

  • Page 46: Wifi Hotspot

    • Any WiFi-enabled device — such as a laptop or any WiFi Hotspot is an in-vehicle feature that connects your other portable enabled media can connect over your device to an operable 1X (voice/data) or 3G (data) private in-vehicle network. network using Uconnect Access and is ready to go where...
  • Page 47 Store. the internet. NOTE: You must set up your Uconnect Payment Account on the Mopar Owner Connect website and establish a Uconnect Payment PIN to purchase WiFi Hotspot. 2. After purchasing WiFi Hotspot, it will be enabled/ turned on in your vehicle.
  • Page 48 ALL ABOUT UCONNECT ACCESS 47 3. WiFi Hotspot should be turned on after purchasing a 4. From your in-vehicle touchscreen, select the appropri- subscription. To disable WiFi Hotspot, simply press to ate in-vehicle network and the desired security level uncheck the box to the right of the App (this feature is setting.

  • Page 49: Voice Texting

    Hotspot. 5. From your Wi-Fi enabled device (laptop, tablet, etc.). Voice Texting • Search for and select the Uconnect hotspot in the Add Free-Form Voice Texts To Your Voice Text Reply settings of your device. Feature •...
  • Page 50 ALL ABOUT UCONNECT ACCESS 49 as if you were talking to the recipient, and the Uconnect to white. This is an indicator that Voice Texting will work Access voice-texting technology will convert your voice with your device. Outgoing voice texts may not be into a text message.
  • Page 51 50 ALL ABOUT UCONNECT ACCESS 3. The system will respond “Say the phone number or the full name and the phone type of the contact that you want to send a message to.” 4. Dictate message (“I will be home at eight.”) 5.
  • Page 52 ALL ABOUT UCONNECT ACCESS 51 Viewing Your Messages 1. Push the “Phone” button on the steering wheel. Contact names or phone numbers of the message sender appears in a list along with View and Listen buttons on the touchscreen. 2. Say “View message.”...
  • Page 53 6). Apple iOS 6 supports receiving text messages, but does not support sending text messages). • Available on vehicles sold in the United States with a Uconnect 8.4A (sales code RA3) or Uconnect 8.4AN (sales code RA4) radio equipped with Uconnect Access.
  • Page 54 Only use Disclaimers Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury • Not all Voice Texting features may be available on your or death.
  • Page 55 Check your device manufacturer if MAP is supported on your device. 4. Do I have to “train” my Uconnect radio to my voice? FCA uses the latest voice recognition engine that 2. Can I use voice texting while in my other FCA provides good recognition without required training.

  • Page 56: All About Uconnect Access

    ALL ABOUT UCONNECT ACCESS 55 6. Does Voice Texting work with accents? Speech isn’t 10. Can I use Text Messaging if the “messaging” button perfect. Technology isn’t perfect. While FCA strives to doesn’t turn white? Only MAP compatible devices use the latest voice recognition engine, the technology will work with Text Messaging.
  • Page 57 56 ALL ABOUT UCONNECT ACCESS • Using the Uconnect Access App from a compatible 3. A pop-up screen will appear asking for your Uconnect device Security PIN (this is the same 4-digit code established when your registered your Uconnect Access system).
  • Page 58 (moparownerconnect.com), select the vehicle you want to send the command by clicking on its image 4. You will then be asked to enter your Uconnect Security along the top. PIN (this is the same 4-digit code established when your registered your Uconnect Access system). Please 3.
  • Page 59 • Vehicle must have an operable 1X (voice/data) or 3G 855-792-4241 (data) network connection. NOTE: The Uconnect Care agents are trained to help you with unlocking of your door (for example, in an acciden- • Vehicle must be registered with Uconnect Access and tal lock-out).
  • Page 60 2. Which is faster, my Key Fob or the Uconnect Access 4. Why can’t all devices use the Uconnect Access App? App? Your Key Fob will lock/unlock the door quicker,...

  • Page 61: Remote Vehicle Start

    60 ALL ABOUT UCONNECT ACCESS 5. Why is the Uconnect Access App running slow? The cool-down the interior before you have to get in. You can Uconnect Access App relies on a mobile network send a request to your vehicle in one of two ways: connection from your device to send commands to •...
  • Page 62 1. Log on to the Mopar Owner Connect website (moparownerconnect.com) using the username and 3. A pop-up screen will appear asking for your Uconnect password you used when registering your Uconnect Security PIN (this is the same 4-digit code established Access system.
  • Page 63 “cancel” button. formed via the Mopar Owner Connect website (moparownerconnect.com) or through the Uconnect Ac- 4. You will then be asked to enter your Uconnect Security cess App on your compatible device. PIN (this is the same 4-digit code established when your registered your Uconnect Access system).
  • Page 64 2. Which is faster, my Key Fob or the Uconnect Access 4. Can someone drive off with my vehicle using the App? Your Key Fob will remote start your vehicle App? No.

  • Page 65: Remote Horn And Lights

    64 ALL ABOUT UCONNECT ACCESS • Using the Uconnect Access App from a compatible 6. Why can’t all devices use the Uconnect Access App? The Uconnect Access App has been designed to work device. on most devices with the Apple and Android operat- •...
  • Page 66 ALL ABOUT UCONNECT ACCESS 65 3. A pop-up screen will appear asking for your Uconnect Mopar Owner Connect website: Security PIN (this is the same 4- digit code established 1. Log on to the Mopar Owner Connect website when your registered your Uconnect Access system).
  • Page 67 2. For security purposes, the Uconnect Care agent will verify your identity by asking for your 4-digit 4. You will then be asked to enter your Uconnect Security Uconnect Security PIN. PIN (this is the same 4-digit code established when your registered your Uconnect Access system).

  • Page 68: Vehicle Health Alert

    “Panic” button. 2. Which is faster, my Key Fob or the Uconnect Access 5. Why can’t all devices use the Uconnect Access App? App? Your Key Fob will sound the horn and flash the The Uconnect Access App has been designed to work lights quicker;...

  • Page 69: Via Mobile Apps

    68 ALL ABOUT UCONNECT ACCESS • Pandora offers personalized radio based on your fa- Via Mobile Apps vorite artists, or songs and can create a custom sta- Pandora — If Equipped tion playing similar music. Custom stations are cre- Pandora gives people the music and comedy they love ated on the Pandora website or the mobile App.
  • Page 70 ALL ABOUT UCONNECT ACCESS 69 • Customers can also create a new Pandora account by Requirements clicking on a link from the Uconnect Access Via Mobile • Vehicle must be properly equipped with the Uconnect profile page during registration and setup.
  • Page 71 Pandora website. compatible device to the vehicle touchscreen. The Uconnect Access App must be open and you must be 4. Can I create a Pandora account during Uconnect logged in. A blue light indicates that it’s providing Access registration and setup? There is a link from the data to the vehicle.
  • Page 72 Pandora App on your device to use 6. Can I create a station from within the vehicle using Pandora Via Mobile. The Uconnect Access App is the vehicle touchscreen? Custom content can only be required, however.
  • Page 73 Ensure that Via Mobile data has been turned on under • Customers can also create a new iHeartRadio account “Settings” in the Uconnect Access App. by clicking on a link from the Uconnect Access Via Mobile profile page during registration and set-up.
  • Page 74 ALL ABOUT UCONNECT ACCESS 73 • Your device must be compatible with the Uconnect Each time you want to use a Via Mobile App in your vehicle, the Uconnect Access App must be running on Access App and properly connected to the vehicle.
  • Page 75 NOTE: Presets must be set from the music player screen. compatible device to the radio. The Uconnect Access App must be open and you must be logged in. A blue • Use the “Discovery Tuner” button on the touchscreen light indicates that it’s providing data to the vehicle.
  • Page 76 8. Should I have the iHeartRadio App downloaded to 4. If I changed my password for iHeartRadio, do I have my device to use Uconnect Access Via Mobile? You to update it with Uconnect Access? Yes. Visit Mopar do not need to have the iHeartRadio App on your Owner Connect moparownerconnect.com, log in,...
  • Page 77 • Reduce the need to use your device to access Slacker 9. How do I know how much data is being used? Uconnect Access Via Mobile uses your device’s exist- Radio so you can stay focused on driving. ing data plan to stream content. Data usage varies by •...
  • Page 78 Each time you want to use a Via Mobile App in your ize your experience. Like a song? Heart it to hear it more vehicle, the Uconnect Access App must be running on often. Dislike a song? Ban it and the song or artist will be your device and the device must be paired via Bluetooth.
  • Page 79 (voice/data) or 3G (data) network. compatible device to the vehicle touchscreen. The Uconnect Access App must be open and you must be • Your device must be connected to a mobile network. logged in. A blue light indicates that it’s providing •...
  • Page 80 8. Should I have the Slacker Radio App downloaded to 5. Can I create a Slacker Radio account during my device to use Uconnect Access Via Mobile? You Uconnect Access registration and set-up? There is a do not need to have the Slacker Radio App on your link from the Via Mobile profile page where the device to use Slacker Radio Via Mobile.
  • Page 81 • Listen to audio updates from Facebook or Twitter 9. How do I know how much data is being used? Uconnect Access Via Mobile uses your device’s exist- (Vehicle must be registered with Uconnect Access). ing data plan to stream content. Data usage varies by •...
  • Page 82 Each time you want to use a Via Mobile App in your settings screen and look for “Associate Accounts.” You vehicle, the Uconnect Access App must be running on can also associate your Aha account from aharadio.com. your device and the device must be paired via Bluetooth.
  • Page 83 Access App must be open and you must be logged • Your device must be connected to a mobile network. in. A blue light indicates that it’s providing data to • Vehicle must be registered with Uconnect Access and the vehicle. have an active subscription that includes the appli- •...
  • Page 84 The 4. How do I sync my Aha account with Facebook, Uconnect Access App must be open. A blue light Twitter and Slacker? Associate your Aha account with indicates that it’s providing data to the vehicle.

  • Page 85: Maintain My Uconnect Access Account

    84 ALL ABOUT UCONNECT ACCESS 9. Can I create an Aha account during Uconnect Access 12. How do I know how much data is being used? registration and setup? There is a link from the Via Uconnect Access Via Mobile uses your device’s exist- Mobile profile page where the customer can go to the ing data plan to stream content.

  • Page 86: Adding Vehicles To My Uconnect Access Account

    • Saturday and Sunday – 8:00 am to 4:00 pm a Vehicle. Connected vehicles must follow the secure registration process to be added to an account. 1. How Do I Register For My Uconnect Access Ac- count? Press the “Apps” button on the in-vehicle UCONNECT CARE AND FAQs touchscreen, then select Uconnect Registration.
  • Page 87 86 ALL ABOUT UCONNECT ACCESS 3. How Do I Create A Uconnect Security PIN? Set up 5. How Do I Create A Uconnect Payment PIN? Log into your Uconnect Security PIN during the registration Mopar Owner Connect website process. The Uconnect Security PIN will be required to moparownerconnect.comwith your username and...
  • Page 88 Edit Profile > Uconnect Payment Account. For more information please contact Uconnect Care 9. How Do I Update My Uconnect Profile? Your name, home address, phone number, email address and 1-855-792-4241 Uconnect Security PIN can be updated online 11.
  • Page 89 App and package PIN and complete the process. subscriptions from your in-vehicle touchscreen, se- You can also go to the Uconnect Store online at lect Apps > Uconnect Store > My Apps. Mopar Owner Connect moparownerconnect.com, select the Shop tab, then Uconnect Store.
  • Page 90 My Subscription? From your vehicle touchscreen > but your subscription will still be active until the select Apps > Uconnect Store > My Apps and choose expiration date. If you subscribe to another package, a subscription to view its expiration date. When your the new subscription will start immediately.
  • Page 91 Uconnect system to its original factory settings. 3G (data) network. Other Uconnect services will only be operable if your Uconnect Access service is active To remove your account information from the and you are connected to an operable 1X (voice/data) Uconnect system contact Uconnect Care at: or 3G (data) network.

  • Page 92: Safety Guidelines

    ALWAYS obey traffic laws and pay attention to the • Ensure the volume level of the system is set to a level road. Some Uconnect Access services, including 9-1-1 that still allows you to hear outside traffic and emer- and Assist, will NOT work without an operable 1X gency vehicles.
  • Page 93 92 ALL ABOUT UCONNECT ACCESS • Permanent hearing loss or damage may occur if you • Do not spray any liquid or caustic chemicals directly play your music or otherwise operate the system at on the screen! Use a clean and dry micro fiber lens loud volumes.
  • Page 94 ALL ABOUT UCONNECT ACCESS 93 FCC Declaration NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, This device complies with Part 15 of the FCC Rules. pursuant to Part 15 of the FCC Rules. These limits are...

  • Page 95: Device Connection And Audio Tips With Uconnect

    94 ALL ABOUT UCONNECT ACCESS Safety Information DEVICE CONNECTION AND AUDIO TIPS WITH UCONNECT Exposure to Radio Frequency Radiation • More than one device can be paired to your vehicle. The radiated output power of the internal wireless radio The connected device with the highest priority will be is far below the FCC radio frequency exposure limits.
  • Page 96 ALL ABOUT UCONNECT ACCESS 95 • Device calls will always have the highest priority • Device calls will mute all audio except for NAV regardless of which connection is active (only the 9-1-1 prompts if guidance is currently active (audio will Call and Assist will have a higher priority than the resume after device call is ended).

  • Page 98: Uconnect 8.4A/8.4An

    ▫ Setting Presets ..... . .105 UCONNECT PHONE ....126 ▫...
  • Page 99 ▫ Play A DVD/Blu-ray Or USB Media File From Uconnect Radio ..... . .223 ▫ Map Updates ......211 ▫...
  • Page 100 UCONNECT 8.4A/8.4AN 99 ▫ Disc Menu ......234 SiriusXM TRAVEL LINK — U.S. MARKET ONLY (8.4AN ONLY) ......243 ▫...

  • Page 101: Uconnect 8.4A/8.4An System

    100 UCONNECT 8.4A/8.4AN UCONNECT 8.4A/8.4AN SYSTEM 2. Media Press the “Media” button on the touchscreen to access media sources such as: Disc (If Equipped), USB Device, AUX, Bluetooth, and SD Card (If Equipped) as long as the requested media is present.

  • Page 102: Personalized Menu Bar

    Uconnect Phone feature. PERSONALIZED MENU BAR 8. Enter/Browse & Tune/Scroll The Uconnect features and services in the main menu bar Push the ENTER/BROWSE button to accept a high- are easily changed for your convenience. Simply follow lighted selection on the screen. Rotate the TUNE/...

  • Page 103: Radio Mode

    102 UCONNECT 8.4A/8.4AN RADIO MODE Radio Controls The radio is equipped with the following modes: • AM • FM • SiriusXM Satellite Radio (if equipped) Press the RADIO button on the touchscreen, bottom left corner, to enter the Radio Mode. The different tuner modes;...
  • Page 104 The electronic volume control turns continuously (360 HD Radio (8.4AN Only) degrees) in either direction, without stopping. Turning HD Radio technology (available on Uconnect 8.4AN in the VOLUME/MUTE control knob clockwise increases the U.S. market) works similar to conventional radio the volume, and counterclockwise decreases it.
  • Page 105 104 UCONNECT 8.4A/8.4AN station or channel. During a Seek Up function, if the Fast Seek Down radio reaches the starting station after passing through Press and hold the “Seek Down” button on the the entire band two times, the radio will stop at the touchscreen to advance the radio through the avail- station where it began.

  • Page 106: Setting Presets

    UCONNECT 8.4A/8.4AN 105 Undo When you are receiving a station that you wish to commit into memory, press and hold the desired num- You can backspace an entry by pressing the bottom left bered button on the touchscreen for more than two “Undo”...

  • Page 107: Siriusxm Satellite Radio Mode - If Equipped

    106 UCONNECT 8.4A/8.4AN Scrolling Preset List Return To Main Radio Screen Once in the Browse Presets screen, you can scroll the You can return to the Main Radio Screen, by pressing the preset list by rotation of the TUNE/SCROLL knob, or by “X”...
  • Page 108 UCONNECT 8.4A/8.4AN 107 • On the go — With a SiriusXM Internet Radio subscrip- to change. Our satellite service is available only to those tion included with the All Access trial, you’ll get at least 18 and older in the 48 contiguous USA and D.C.
  • Page 109 108 UCONNECT 8.4A/8.4AN No Subscription When in Satellite mode: • The SXM button on the touchscreen is highlighted. Radios equipped with a Satellite receiver, require a subscription to the SiriusXM Service. When the Radio • The SiriusXM Presets are displayed at the top of the does not have the necessary subscription, the Radio is screen.
  • Page 110 UCONNECT 8.4A/8.4AN 109 In addition to the tuning Operation functions common to Play/Pause all Radio modes, the replay, Traffic/Weather Jump, and Press the “Pause/Play” button on the touchscreen to fav button functions are available in SiriusXM Mode. pause the playing of live or rewound content at any time.
  • Page 111 110 UCONNECT 8.4A/8.4AN the touchscreen also forwards the content. The Radio information to alert you when either the favorite song, or begins playing the content at the point at which the press favorite artist are being played at any time by any of the is release.
  • Page 112 UCONNECT 8.4A/8.4AN 111 When the Traffic & Weather button on the touchscreen is Channel List pressed, the Traffic & Weather channel is tuned. Press the Channel List, or Genre, to display all the If the Traffic & Weather alert City is not set, you are SiriusXM Channel Numbers.
  • Page 113 112 UCONNECT 8.4A/8.4AN You can scroll the Presets list pressing the up and down Favorites arrows located at the right side of the screen. Scrolling Press the “Favorites” button located at the left of the can also be done by operating the TUNE/SCROLL knob Browse screen.
  • Page 114 UCONNECT 8.4A/8.4AN 113 Alert Settings Select Teams Press the “Alert Setting” tab at the top of the screen. The Press the “Select Teams” button on the touchscreen to Alert Settings menu allows you to choose from a Visual activate the League Scroll list. Press the chosen league...

  • Page 115: Audio

    114 UCONNECT 8.4A/8.4AN Audio Balance/Fade Press the “Audio” button on the touchscreen to activate the Audio settings screen to adjust Balance/Fade, Equal- izer, Speed Adjusted Volume, Aux volume Offset, and Surround Sound. You can return to the Radio screen by pressing the “X”...
  • Page 116 UCONNECT 8.4A/8.4AN 115 Equalizer Speed Adjusted Volume Press the “Equalizer” button on the touchscreen to acti- Press the “Speed Adjusted Volume” button on the touch- vate the Equalizer screen. screen to activate the Speed Adjusted Volume screen. Press the “+” or “–” buttons, or by pressing and dragging over the level bar for each of the equalizer bands.
  • Page 117 116 UCONNECT 8.4A/8.4AN The Speed Adjusted Volume is adjusted by selecting from “Off,” “1,” “2” or “3.” This alters the automatic adjust- ment of the audio volume with variation to vehicle speed. Volume increases automatically as speed increase to compensate for normal road noise.
  • Page 118 UCONNECT 8.4A/8.4AN 117 Loudness AUX Volume Offset Press the “On” button on the touchscreen to activate Press the “AUX Volume Offset” button on the touch- Loudness. Press “Off” to deactivate this feature. screen to activate the AUX Volume Offset screen.

  • Page 119: Media Mode

    118 UCONNECT 8.4A/8.4AN MEDIA MODE Browse Press the “Browse” button on the touchscreen to display Disc Mode — If Equipped the browse window. The left side of the browse window Overview displays a list of ways you can browse through the Disc Mode is entered by either inserting a Disc or contents of the Disc.
  • Page 120 UCONNECT 8.4A/8.4AN 119 Repeat Info Press the “Repeat” button on the touchscreen to toggle Press the “Info” button on the touchscreen to display the the repeat functionality. The Repeat button on the touch- current track information. Press the “Info” button on the screen is highlighted when active.

  • Page 121: Usb/Ipod Mode

    120 UCONNECT 8.4A/8.4AN USB/iPod Mode contents of the USB device/iPod. If supported by the device, you can browse by Folders, Artists, Playlists, Overview Albums, Songs, etc. Press the desired button on the left USB/iPod Mode is entered by either inserting a USB side of the screen.

  • Page 122: Aux Mode

    UCONNECT 8.4A/8.4AN 121 Shuffle line above and below the track name) and then push the ENTER/BROWSE knob to start playing that track. Press the “Shuffle” button on the touchscreen to play the selections on the USB/iPod device in random order to Pressing the “trks”...

  • Page 123: Sd Card Mode - If Equipped

    122 UCONNECT 8.4A/8.4AN ON and the radio ON, the unit will switch to AUX mode Audio and begin to play when you insert the device cable. Refer to Radio Mode for adjusting the audio settings. Controlling The Auxiliary Device SD Card Mode — If Equipped The control of the auxiliary device (e.g., selecting play-...
  • Page 124 UCONNECT 8.4A/8.4AN 123 Browse Repeat Press the “Browse” button on the touchscreen to display Press the “Repeat” button on the touchscreen to toggle the browse window. The left side of the browse window the repeat functionality. The Repeat button on the touch- displays a list of ways you can browse through the screen is highlighted when active.

  • Page 125: Bluetooth Mode

    ENTER/BROWSE knob to start playing that Uconnect System. track. NOTE: See the pairing procedure in the Uconnect Phone Pressing the “trks” button on the touchscreen while the section for more details. pop up is displayed will close the pop up.
  • Page 126 UCONNECT 8.4A/8.4AN 125 current selection, or return to the beginning of the previous selection if the Bluetooth device is within the first second of the current selection. Media Mode Press the “Media” button on the touchscreen to select the desired audio source: Bluetooth.

  • Page 127: Uconnect Phone

    • Searching Contacts phone number (“Search for John Uconnect Phone supports the following features: Smith Mobile”). Voice Activated Features: • Voice Texting (Requires registration to Uconnect Ac- • Hands-Free dialing via Voice (“Call John Smith Mo- cess and a current subscription). bile” or, “Dial 248-555-1212”).
  • Page 128 800-387-9983 • Pairing up to 10 phones/audio devices for easy access Uconnect Phone allows you to transfer calls between the to connect to them quickly. system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone NOTE: Your phone must be capable of SMS messaging for private conversation.
  • Page 129 Only use show recent, incoming, outgoing calls, view phone- Uconnect when it is safe to do so. Failure to do so book etc., When you press the button you will hear a may result in an accident involving serious injury BEEP.

  • Page 130: Operation

    The Uconnect Phone is fully integrated with the vehicle’s guided through the available options. audio system. The volume of the Uconnect Phone can be • Prior to giving a voice command, one must wait for the adjusted either from the radio volume control knob or beep, which follows the “Listen”...
  • Page 131 Natural Speech question to which the user can respond without pushing the “Voice Command” button on your steering Your Uconnect Phone Voice system uses a Natural Lan- wheel. guage Voice Recognition (VR) engine. Help Command Natural speech allows the user to speak commands in phrases or complete sentences.
  • Page 132 Pair (Link) Uconnect Phone To A Mobile Phone To begin using your Uconnect Phone, you must pair your compatible Bluetooth enabled mobile phone. Mobile phone pairing is the process of establishing a wireless connection between a cellular phone and the Uconnect system.
  • Page 133 3. Select “Yes” to begin the pairing process. 6. Uconnect Phone will display an in progress screen 4. Search for available devices on your Bluetooth enabled while the system is connecting. mobile phone.
  • Page 134 Only one mobile phone Pair Additional Mobile Phones and/or one Bluetooth audio device can be connected to the Uconnect system at a time. If “No” is selected, 1. Press the “Settings” button on the touchscreen from simply select “Uconnect” from the mobile phone/ the Phone main screen.
  • Page 135 4. Search for available devices on your Bluetooth enabled • “Connect My Phone” mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect screen. Pair A Bluetooth Streaming Audio Device 5. Uconnect Phone will display an in process screen 1.
  • Page 136 • “Connect My Phone” PIN shown on the Uconnect screen. Connecting To A Particular Mobile Phone Or 6. Uconnect Phone will display an in process screen Audio Device After Pairing while the system is connecting. Uconnect Phone will automatically connect to the highest 7.
  • Page 137 136 UCONNECT 8.4A/8.4AN 2. Press the “Paired Phones” or “Paired Audio Sources” Deleting A Phone Or Audio Device button on the touchscreen. 1. Press the “Settings” button on the touchscreen. 3. Press to select the particular Phone or the particular 2.
  • Page 138 5. Press the “Make Favorite” button on the touchscreen; supported, begins as soon as the Bluetooth wireless you will see the chosen device move to the top of the phone connection is made to the Uconnect Phone, for list. example, after you start the vehicle.
  • Page 139 • This downloaded phonebook cannot be edited or NOTE: If the Favorites list is full, you will be asked to deleted on the Uconnect Phone. These can only be remove an existing favorite. edited on the mobile phone. The changes are trans- 3.

  • Page 140: Phone Call Features

    UCONNECT 8.4A/8.4AN 139 To Remove A Favorite calling, this feature can be accessed through the Uconnect Phone. Check with your mobile service provider for the 1. To remove a Favorite, select “phonebook” from the features that you have. Phone main screen.
  • Page 141 • Answer 2. After the “Listening” prompt and the following beep, say “Dial 151-123-4444.” • End 3. The Uconnect Phone will dial the number 151-123- • Ignore 4444. • Hold/unhold Call By Saying A Phonebook Name • Mute/unmute 1.
  • Page 142 UCONNECT 8.4A/8.4AN 141 Touch-Tone Number Entry Recent Calls You may browse up to 31 of the most recent of each of the 1. Press the “Phone” button on the touchscreen. following call types: 2. Press the “Dial” button on the touchscreen.
  • Page 143 142 UCONNECT 8.4A/8.4AN Answer Or Ignore An Incoming Call — No Call NOTE: The Uconnect Phone compatible phones in the Currently In Progress market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can When you receive a call on your mobile phone, the only answer an incoming call or ignore it.
  • Page 144 UCONNECT 8.4A/8.4AN 143 Automatic reply messages can be: Place/Retrieve A Call From Hold • “I am driving right now, I will get back to you shortly.” During an active call, press the “Hold” button on the Phone main screen. • Create a custom auto reply message up to 160 charac- Making A Second Call While Current Call Is In ters.

  • Page 145: Advanced Phone Connectivity

    To transfer an ongoing call from your connected mobile phone to the Uconnect The Uconnect Phone will call the last number that was Phone or vice versa, press the “Transfer” button on the dialed from your mobile phone.

  • Page 146: Things You Should Know About Your Uconnect

    If you would like to connect or disconnect the Bluetooth • Ensure that no one other than you is speaking during connection between a Uconnect Phone paired mobile phone and the Uconnect Phone, follow the instructions a voice command period. described in your mobile phone User’s Manual.
  • Page 147 ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all risks Far End Audio Performance related to the use of the Uconnect features and Audio quality is maximized under: applications in this vehicle. Only use Uconnect when it is safe to do so.
  • Page 148 Performance such as audio clarity, echo, and loudness to Here’s how: Push the “Uconnect Phone” button a large degree rely on the phone and network, and not wait for the beep, then say “reply.” Uconnect will give the Uconnect Phone. the following prompt: “Please say the message you would like to send.”...
  • Page 149 Only use “I can’t talk “Stuck in traf- “I will be <number> Uconnect when it is safe to do so. Failure to do so right now.” fic.” minutes late.” may result in an accident involving serious injury Voice Texting Reply and Voice Texting features require a or death.
  • Page 150 Voice Texting feature, check to ensure you have the following: 4. Uconnect will prompt you “Say the phone number, or full name and phone type of the contact you want to 1. A Paired, Bluetooth enabled phone with the Message send a message to.”...
  • Page 151 10. If you are happy with your message and would like to send it, wait for the beep and say “Send.” 9. Uconnect will prompt you: To add to your message, say “Continue”; to delete the current message and start over, 11.

  • Page 152: Navigation

    Mobile phones have been found to lose connection to the user’s authority to operate the equipment. Uconnect Phone. When this happens, the connection can • This device may not cause harmful interference. generally be re-established by switching the mobile phone OFF/ON.
  • Page 153 152 UCONNECT 8.4A/8.4AN • Press “View Map” to view the map. • Press “Information” to view Traffic, Where Am I? and Trip Computer information. • Press “Emergency” to search for Hospitals, Police and Fire Stations near your current location. You can also display your current location and save any Emergency facility location to your Favorites.

  • Page 154: Where To

    UCONNECT 8.4A/8.4AN 153 Where To? NOTE: Refer to the individual section of the chosen option for further information. Where To? — Main Menu Address Press this button on the touchscreen to search by a street address or a street name with house number.
  • Page 155 154 UCONNECT 8.4A/8.4AN Favorites geography. You can determine a geo coordinate with the help of a handheld GPS receiver, a map, or the navigation Press this button on the touchscreen to access previously system. saved addresses or locations. Point on Map...
  • Page 156 UCONNECT 8.4A/8.4AN 155 are driving. Select the option to stop trail recording to Where To? — Address end tracking. This gives you a point of reference to for a To enter a destination by Address, follow these steps: particular route if needed.
  • Page 157 156 UCONNECT 8.4A/8.4AN 2. Press “Enter City” or “Enter Street” to begin entering If you press “Enter Street,” you will have to enter and the address of your destination. select/press the desired street name in the correct city and then you will have to enter the house number.
  • Page 158 UCONNECT 8.4A/8.4AN 157 Once the correct City, Street and Number has been If you are currently on a route guidance and you select entered, you will be asked to confirm your destination Recent, the system will ask you to choose one of the by pressing “OK.”...
  • Page 159 158 UCONNECT 8.4A/8.4AN 2. Press the button on the touchscreen with the name of 3. Confirm the route with “Yes” to start the route guid- the desired destination. ance. To delete a destination from the list, press the “Trash Can Icon” button on the touchscreen.
  • Page 160 UCONNECT 8.4A/8.4AN 159 To display the options for a destination press the “Options” button on the touchscreen that looks like a gear. • Edit Name • Add Phone Number • Move Up in the list The following Options are available for each destination: •...
  • Page 161 160 UCONNECT 8.4A/8.4AN NOTE: You can press the “back arrow” button on the The Point of Interest database allows you to select a touchscreen to return to the previous screen or the “X” destination from a list of locations and public places, or button on the touchscreen to exit.
  • Page 162 UCONNECT 8.4A/8.4AN 161 • Near Destination (only available during route guidance) • Along Route (only available during route guidance) You can also change your POI search area, by pressing the “Change Search Area” button on the touchscreen. You will have the following options to change your search area: NOTE: You can press the “back arrow”...
  • Page 163 162 UCONNECT 8.4A/8.4AN POI — Gas Stations 2. Press the “Gas Stations” button on the touchscreen. To select a Gas Station POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest”...
  • Page 164 UCONNECT 8.4A/8.4AN 163 • Type If you are currently on a route guidance and you select a • ABC (Search) gas station, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination •...
  • Page 165 164 UCONNECT 8.4A/8.4AN POI — Restaurants To select a Restaurant POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen. You can search for a restaurants by the following categories, which are button tabs at the top of the screen.
  • Page 166 UCONNECT 8.4A/8.4AN 165 3. Press the desired Restaurant and press “Yes” to con- POI — Hotels/Motels firm the destination. To select a Hotel or Motel POI, follow these steps: If you are currently on a route guidance and you select a 1.
  • Page 167 166 UCONNECT 8.4A/8.4AN • Type 2. Press the “Hotels/Motels” button on the touchscreen. • ABC (Search) 3. Press the desired hotel or motel and press “Yes” to confirm the destination. If you are currently on a route guidance and you select a...
  • Page 168 UCONNECT 8.4A/8.4AN 167 POI — ATM/Banking To select a ATM or Bank POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen.
  • Page 169 168 UCONNECT 8.4A/8.4AN 3. Press the desired ATM or Bank and press “Yes” to All POIs confirm the destination. To select a POI type, follow these steps: If you are currently on a route guidance and you select an 1. While in the Nav Main Menu, press the “Where To?”...
  • Page 170 UCONNECT 8.4A/8.4AN 169 • Automotive 2. Press “All POIs” button on the touchscreen. • Coffee Shops • Community • Entertainment • Gas Stations • Health and Beauty • Highway Exit • Hospital • Hotels/Motels • Other • Parking • Recreation You can search through the available POI categories to •...
  • Page 171 170 UCONNECT 8.4A/8.4AN 4. Press the desired POI and press “Yes” to confirm the destination. If you are currently on a route guidance and you select a POI, the system will ask you to choose one of the following: • Cancel previous route •...
  • Page 172 UCONNECT 8.4A/8.4AN 171 POI — Spell Name To select for a specific POI, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Point of Interest” button on the touchscreen.
  • Page 173 172 UCONNECT 8.4A/8.4AN If you are currently on a route guidance and you select a Where To? — Favorite Destinations POI, the system will ask you to choose one of the To route to a Favorite destination, follow these steps: following: 1.
  • Page 174 UCONNECT 8.4A/8.4AN 173 2. Press the button on the touchscreen with the name of If you are currently on a route guidance and you select a the desired favorite destination and confirm the route Favorite, the system will ask you to choose one of the with Yes to start the route guidance.
  • Page 175 174 UCONNECT 8.4A/8.4AN 2. Press the “Enter City” button, to enter the desired city 3. Once the correct City has been selected, you will be name. asked to spell the desired street name, then enter the intersecting street. NOTE: If the system automatically recognizes the city it...
  • Page 176 UCONNECT 8.4A/8.4AN 175 4. Press the “Yes” button on the touchscreen to confirm Where To? — Go Home your destination and begin your route. To enter your Home Address, follow these steps: If you are currently on a route guidance and you select a 1.
  • Page 177 176 UCONNECT 8.4A/8.4AN If there is no Home Address entered, press “Yes” to Once you have generated your Home Address, you will enter it now. be asked to Save it. 2. To set your Home Address choose one of the following 3.
  • Page 178 UCONNECT 8.4A/8.4AN 177 3. Press “Clear Home” and then press “Yes” to clear/ delete your Home Address. 4. To enter in a new Home Address, follow the Where To? – Go Home procedure. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X”...
  • Page 179 178 UCONNECT 8.4A/8.4AN To add a Trip, follow these steps: 1. Press the “Create new Trip” button on the touchscreen. 2. Type in the new Trip Name. 3. Press “Add Destination” to add destinations to your trip. 4. Choose from the following options to add a destina- tion •...
  • Page 180 UCONNECT 8.4A/8.4AN 179 • City Center The following Options are available for each trip: • Closest Cities • Edit Name • Phone Number • Move Up in the list NOTE: Refer to the individual section of the chosen • Move Down in the list option for further information.
  • Page 181 180 UCONNECT 8.4A/8.4AN 2. Enter the Latitude by typing in the numbers. Use the Press the “Format” button on the touchscreen to left and right arrows to select specific numbers in the change the format of the Latitude/Longitude entry. location shown.
  • Page 182 UCONNECT 8.4A/8.4AN 181 5. Press “OK” to confirm the destination. Where To? — Point on Map To enter a destination by Point on Map, follow these 6. Press the “Yes” button on the touchscreen to confirm steps: your destination and begin your route.
  • Page 183 182 UCONNECT 8.4A/8.4AN 2. Use the touchscreen to drag the center of the cross 4. Press the “Yes” button on the touchscreen to confirm over the desired destination. your destination and begin your route. If you are currently on a route guidance and you select a...
  • Page 184 UCONNECT 8.4A/8.4AN 183 Where To? — City Center 2. Enter the name of the City you would like to route to. To enter a destination by City Center, follow these steps: 1. While in the Nav Main Menu, press the “Where To?”...
  • Page 185 184 UCONNECT 8.4A/8.4AN If you are currently on a route guidance and you select a Where To? — Closest Cities City Center, the system will ask you to choose one of the To enter a destination by Closest City, follow these steps: following: 1.
  • Page 186 UCONNECT 8.4A/8.4AN 185 2. Press the desired city from the list. If you are currently on a route guidance and you select a Closest City, the system will ask you to choose one of the following: • Cancel previous route •...
  • Page 187 186 UCONNECT 8.4A/8.4AN Where To? — Trails 2. Press “Start Trail Recording.” When starting to drive a trail you want to record, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen then press the “Trails”...
  • Page 188 UCONNECT 8.4A/8.4AN 187 Where To? — Phone 2. Enter the Phone Number of the destination you would like to route to. To enter a destination by Phone number, follow these steps: 3. Press the desired destination from the list. 1. While in the Nav Main Menu, press the “Where To?”...
  • Page 189 188 UCONNECT 8.4A/8.4AN Before Route Guidance Before confirming the route with the “Yes” button on the touchscreen, it is possible to select options different from the default route settings. • Options – Press the “Options” button on the touch- screen to display a list of options to alter your route. To make a selection press and release the desired setting until a check-mark appears.
  • Page 190 UCONNECT 8.4A/8.4AN 189 • Avoid – Press the “Avoid” button on the touchscreen to choose road types to avoid during your route. To make a selection press and release the desired setting until a check-mark appears.

  • Page 191: View Map

    190 UCONNECT 8.4A/8.4AN • Save – Press the “Save” button on the touchscreen to save the destination as a Favorite. Press the “Yes” button on the touchscreen to confirm your destination and to start your route guidance. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X”...
  • Page 192 UCONNECT 8.4A/8.4AN 191 Zoom In +/Zoom Out – Press the “Zoom In (+) or Zoom Out (–)” buttons on the touchscreen to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels. (e.g. residential streets, lightly-traveled county roads.)
  • Page 193 192 UCONNECT 8.4A/8.4AN • Settings Turn List (only during route guidance) Press the area in the upper center part of the screen that Press this button on the touchscreen to view all the displays your next turn to see a Turn List for your current available settings.
  • Page 194 UCONNECT 8.4A/8.4AN 193 Where Am I? Press the area in the lower center part of the screen that displays your current location to view the Where Am I? view. Where Am I? displays the address and GEO Coordinates of your current location.
  • Page 195 194 UCONNECT 8.4A/8.4AN View Map — Settings With the Map displayed, press the “Options” button on the touchscreen then press the “Settings” button on the touchscreen. The following Map Settings are available: • Map Setup — Press this button on the touchscreen to display items to customize how your map is viewed.
  • Page 196 UCONNECT 8.4A/8.4AN 195 • Speed Limit — Press this button on the touchscreen to • GPS (DMS) — Press this button on the touchscreen to turn on/off speed limit warning announcements and change the GPS display. Press the desired button on to enter a pre-defined speed limit for your route.
  • Page 197 196 UCONNECT 8.4A/8.4AN Settings — Map Setup With the Map displayed, press the “Options” button on the touchscreen, then press the “Settings” button on the touchscreen and then the “Map Setup” button on the touchscreen. The following Map Setup options are available:...
  • Page 198 UCONNECT 8.4A/8.4AN 197 • 3D (3D Map View Is Only Available On Uconnect Destination Information 8.4AN. Must Select 3D City Models Or 3D Landmarks Press this button on the touchscreen to change the For 3D Map View To Display.) Destination Information that is displayed in the upper •...
  • Page 199 198 UCONNECT 8.4A/8.4AN • Near while in Map View. Press and release the desired selec- tion button on the touchscreen until a check-mark ap- • Off pears, showing the setting has been selected. Vehicle Icon TMC Incidents – If Equipped...
  • Page 200 UCONNECT 8.4A/8.4AN 199 3D City Models (Available On The Uconnect 8.4AN) Park Areas Press this button on the touchscreen to display 3D city Press this button on the touchscreen to display Park models while in Map View. Press and release the button Areas while in Map View.
  • Page 201 200 UCONNECT 8.4A/8.4AN River Names The following Guidance options are available. • Play Voice Guidance Prompts Press this button on the touchscreen to display River Names while in Map View. Press and release the button Press this button on the touchscreen to enable Voice on the touchscreen until a check-mark appears, showing Guidance Prompts during route guidance.
  • Page 202 UCONNECT 8.4A/8.4AN 201 • Lane Recommendation • TMC Route Mode (If Equipped) Press this button on the touchscreen to enable Lane Press this button on the touchscreen to change how the Recommendation during route guidance. Press and re- Traffic Message Channel (TMC) Route Mode functions lease the button on the touchscreen until a check-mark during route guidance.

  • Page 203: Information

    202 UCONNECT 8.4A/8.4AN • Avoid Press the Avoid button on the touchscreen to choose road types to avoid during your route. To make a selection press and release the desired setting until a check-mark appears. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X”...
  • Page 204 UCONNECT 8.4A/8.4AN 203 Information — Where Am I? To select “Where Am I?” information, follow these steps: 1. While in the Nav Main Menu, press the “Information” button on the touchscreen. 2. Press the “Where Am I?” button on the touchscreen.
  • Page 205 204 UCONNECT 8.4A/8.4AN Where Am I? displays the address and GEO Coordi- nates of your current location. 3. Press the “GPS” button on the touchscreen to view the GPS information. 4. Press the “Save” button on the touchscreen to save the location in your Favorites.

  • Page 206: Emergency

    UCONNECT 8.4A/8.4AN 205 • Moving average speed • Police – Search and route to a Police Station close to • Maximum speed reached your current location • Total time traveled • Fire Department – Search and route a Fire Department •...
  • Page 207 206 UCONNECT 8.4A/8.4AN Press the “Save” button on the touchscreen to save your current location in Favorites. NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit.
  • Page 208 UCONNECT 8.4A/8.4AN 207 NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. 3. Press the desired Hospital and press “Yes” to confirm the destination. If you are currently on a route guidance and you select a...
  • Page 209 208 UCONNECT 8.4A/8.4AN Emergency — Police To search for a Police Station close to your current location, follow these steps: 1. While in the Nav Main Menu, press the “Emergency” button on the touchscreen. You can search for a Police Station by the following categories, which are button tabs at the top of the screen.
  • Page 210 UCONNECT 8.4A/8.4AN 209 NOTE: In case of emergency, please contact the facility to Emergency — Fire Department verify their availability before proceeding. To search for a Fire Department close to your current location, follow these steps: 3. Press the desired Police Station and press “Yes” to confirm the destination.
  • Page 211 210 UCONNECT 8.4A/8.4AN • ABC (Search) 2. Press the “Fire Department” button on the touch- screen. NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. 3. Press the desired Fire Department and press “Yes” to confirm the destination.

  • Page 212: Map Updates

    UCONNECT 8.4A/8.4AN 211 Map Updates 2. Or, visit DriveUconnect.com and follow these steps: • Under the “Help & Support” tab, select your vehicle The map data available in your vehicle is the most brand. Click “NAVTEQ NAVIGATION UPDATES.” up-to-date information that was available when your Simply enter your information and place your order.

  • Page 213: Uconnect Theater - If Equipped

    212 UCONNECT 8.4A/8.4AN UCONNECT THEATER — If Equipped Getting Started Your Uconnect Theater is designed to give your family years of enjoyment. There are multiple ways to interact with your Uconnect Theater system. • Play your favorite CDs, DVDs or Blu-ray Discs •...

  • Page 214: Accessing The System From The Uconnect

    UCONNECT 8.4A/8.4AN 213 There are three different ways to operate the features of Accessing The System From The Uconnect Radio the Uconnect Theater. • The Remote Control • The Touchscreen Radio • The Individual Video Screens...

  • Page 215: Uconnect Theater Controls

    214 UCONNECT 8.4A/8.4AN You can access your Uconnect Theater system from the Uconnect Theater Controls radio following the steps below. 1. Press the “Media” button. 2. Press the “Uconnect Theater” button icon. NOTE: The Uconnect Theater icon may be dragged and dropped down to the personalized menu bar to create an App/shortcut.

  • Page 216: Accessing The System From The Uconnect Theater Rear Screens

    Press this button and use the “Listen In” feature to listen to audio through cabin speakers. Accessing The System From The Uconnect Theater Rear Screens You can also access your Uconnect Theater system from the rear screens from the steps below.
  • Page 217 “Reset to Defaults” then select “YES.” 3. If “NO” is selected, the Uconnect Theater home screen will pop up. NOTE: • There will be a touchscreen notification message when pairing is successful.

  • Page 218: Pairing The Remote

    • The system can accommodate up to 10 paired remote controls. Unpairing The Remote If the remote needs to be paired to your Uconnect Theater system, follow the procedure below: In events such as updating the Uconnect Theater soft- ware, or taking a remote to another vehicle, the remote 1.

  • Page 219: Media Sources

    218 UCONNECT 8.4A/8.4AN will need to be unpaired from your Uconnect Theater Media Sources system. To unpair the remote, follow the procedure below: 1. Select “Manage Remote Controls” from the Remote section of Settings and follow the on screen instruc- tions to complete the unpairing process.

  • Page 220: Uconnect Theater Remote Control

    UCONNECT 8.4A/8.4AN 219 Users can select content for each screen from the radio by Uconnect Theater Remote Control choosing desired content from drop down menu. NOTE: Use the “View Screen” function to pull content from one screen to the other in a single press of a button.
  • Page 221 220 UCONNECT 8.4A/8.4AN 2. Mute Button — Mutes headphone audio. 8. OK Button — Push to select the highlighted option in a menu. 3. Home Button — Push to access “Sources”. 9. Screen Selector Button — Push the screen selector to 4.

  • Page 222: Uconnect Theater Home Screen And Controls

    UCONNECT 8.4A/8.4AN 221 Replacing The Remote Control Batteries Uconnect Theater Home Screen And Controls The remote control requires two AAA batteries for op- eration. To replace the batteries: 1. Locate the battery compartment on the back of the remote, then slide the battery cover downward.
  • Page 223 222 UCONNECT 8.4A/8.4AN NOTE: • Source card order can be changed by pressing the Settings button on the touchscreen and scrolling down to Source Card Order . • Use the “View Screen” function to pull content from one screen to the other. Doing this however will disable and gray out certain player controls.

  • Page 224: Play A Dvd/Blu-Ray Or Usb Media File From

    UCONNECT 8.4A/8.4AN 223 You can also adjust the following below and more. Play A DVD/Blu-ray Or USB Media File From Uconnect Radio • Brightness The DVD/Blu-ray Disc player is located under the radio • Media port lighting on and off controls in the instrument panel.
  • Page 225 224 UCONNECT 8.4A/8.4AN Using The Touchscreen Radio NOTE: Control functions apply to individual screen selected displayed on touchscreen. 1. Power Press to turn “selected Screen” On/Off.
  • Page 226 UCONNECT 8.4A/8.4AN 225 2. Mute 2. Press the “Uconnect Theater” button on the touch- screen. Refer to “Accessing The System From The Mute rear headphones for selected source for the Uconnect Radio” Within this section for further infor- current ignition cycle. Pressing mute again will un- mation.

  • Page 227: Blu-Ray Controls - Disc Specific Functions

    226 UCONNECT 8.4A/8.4AN Blu-ray Controls – Disc Specific Functions The four colored buttons (red, green, blue, yellow) are designed for use with certain Blu-ray disc movie titles to access particular features or software on the disc. See the documentation provided with your Blu-ray disc movie to see if these buttons can be used.

  • Page 228: Uconnect Theater Apps

    UCONNECT 8.4A/8.4AN 227 Uconnect Theater Apps Select the Apps source card to play pre-loaded games. Pressing the “Help” button teaches users how to play each game. Pick from games: • Back Seat Bingo • Checkers • Hanging Fruit...
  • Page 229 228 UCONNECT 8.4A/8.4AN • License Plate Game • Math Flash Cards • Solitaire • Sudoku • Tic Tac Toe NOTE: To exit a game, push “Exit Button” than “Back Arrow,” or “Home Button” on the touchscreen.

  • Page 230: Using The Rear Video Usb Port

    UCONNECT 8.4A/8.4AN 229 Are We There Yet? Using The Rear Video USB Port When a navigation route has been set from the Uconnect radio the second row passengers can use “Are We There Yet?” for an animated screen showing distance and time remaining on navigation routes as well as the estimated time of arrival with pop-up notifications.

  • Page 231: Play Video Games

    230 UCONNECT 8.4A/8.4AN NOTE: To view USB media on the rear theater screens, Play Video Games insert a USB jump drive into the port on the DVD/Blu- Connect the video game console to the HDMI 1 or 2 ray disc player. The USB jump drive port is located under ports, located behind the first row seat.

  • Page 232: Headphones Operation

    UCONNECT 8.4A/8.4AN 231 NOTE: Certain high-end video games will exceed the power limit of the vehicle’s Power Inverter. Refer to “Power Inverter” in “Getting To Know Your Vehicle” in this guide for further information. Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen.
  • Page 233 232 UCONNECT 8.4A/8.4AN NOTE: Uconnect Theater must be turned on before 1. Ensure the remote control and the headphones are on sound can be heard from the headphones. To conserve the same channel. battery life, the headphones will automatically turn off 2.
  • Page 234 UCONNECT 8.4A/8.4AN 233 3. Replace the battery compartment cover. over time through normal use, are specifically not cov- ered (replacement foam is available for a nominal Delphi Automotive Stereo Headphone Lifetime charge). DELPHI AUTOMOTIVE IS NOT LIABLE FOR Limited Warranty...

  • Page 235: Disc Menu

    234 UCONNECT 8.4A/8.4AN What Will Delphi Automotive Do? Delphi Automotive, Disc Menu at its option, will repair or replace any defective Product. When listening to a CD Audio or CD Data disc, pushing Delphi Automotive reserves the right to replace any the remote control’s arrow buttons will navigate the...

  • Page 236: Rear Climate Controls

    The rear climate controls can also be controlled using the Uconnect Theater system. Refer to “Climate Controls” in “Getting To Know Your Vehicle” for further information.

  • Page 237: Bd And Dvd Region Codes

    236 UCONNECT 8.4A/8.4AN BD And DVD Region Codes compatible format and is playable on other players. To help avoid playback problems, use the following guide- Many BD and DVD discs are coded by geographic lines when recording discs. region. These region codes must match in order for the •...
  • Page 238 UCONNECT 8.4A/8.4AN 237 If you are still having trouble writing a disc that is WMA files must always end with the extension playable in the Blu-ray Disc player, check with the disc “.wma” or “.WMA” and AAC files must always end recording software publisher for more information about with the extension and “.aac”...
  • Page 239 238 UCONNECT 8.4A/8.4AN • If you are creating your own files, the recommended Disc Errors fixed bit rate for MP3 files is between 32 and 320Kbps If the Blu-ray Disc player is unable to read the disc, a and the recommended fixed bit rate for WMA files is Disc Error message is displayed on the rear screen and between 16 and 192Kbps.

  • Page 240: Product Agreement

    UCONNECT 8.4A/8.4AN 239 off the Rear Seat displays until a safe temperature is Please refer the contract details which are disclosed in reached. This shutdown is necessary to protect the optics following website, for example, concerning these above of the Blu-ray Disc player.
  • Page 241 240 UCONNECT 8.4A/8.4AN Dolby boot_ kernel FreeType glibc loader Manufactured under license from Dolby Laboratories. sh4eb 2.6.16.29 2 2.2.1 2.3.5 sh-ipl +g Dolby and the double-D symbol are trademarks of Dolby 3.4.5 1.00 Laboratories. MAKE module- libgcc_s- bash- busybox init-tools 3.4.5...
  • Page 242 UCONNECT 8.4A/8.4AN 241 MPEG The DVD logo” is a trademark of DVD Format/Logo THIS PRODUCT IS LICENSED UNDER THE AVC PAT- Licensing Corporation. or DVD logo is a trademark of ENT PORTFOLIO LICENSE FOR THE PERSONAL AND DVD Format/Logo Licensing Corporation registered in NON-COMMERCIAL USE OF A CONSUMER TO (i) the U.S., Japan and other countries.

  • Page 243: General Information

    242 UCONNECT 8.4A/8.4AN your registration code in the DivX VOD section of your 7,369,677 and other U.S. and worldwide patents issued device setup menu. DivX, DivX Certified and associated and pending as well as copyright and trade secret logos are trademarks of DivX, LLC and are used under protection for certain aspects of such technology.

  • Page 244: Siriusxm Traffic - U.s. Market 8.4An Only

    UCONNECT 8.4A/8.4AN 243 2. This device must accept any interference that may be 2. Traffic information from multiple sources, including received including interference that may cause unde- police and emergency services, cameras and road sired operation. sensors. 3. Coast-to-coast delivery of traffic information.

  • Page 245: Security Features

    Roadside ever you like, with no waiting. Assistance, Uconnect Care and Vehicle Care by pressing the “Assist” button on the Rearview Mirror of your • To access SiriusXM Travel Link, press the “Apps ”...

  • Page 246: 9-1-1 Call - If Equipped

    UCONNECT 8.4A/8.4AN 245 To provide Uconnect Services to you, we may record and NOTE: In case the 9-1-1 Call button is pushed in error, monitor your conversations with Roadside Assistance, there will be a 10 second delay before the 9-1-1 Call Uconnect Care or Vehicle Care, whether such conversa- system initiates a call to a 9-1-1 operator.
  • Page 247 ALWAYS obey traffic laws and pay attention to the the vehicle to determine if additional help is needed. road. Some Uconnect Access services, including 9-1-1 Once the 9-1-1 operator opens a voice connection and Assist, will NOT work without an operable 1X with the vehicle’s 9-1-1 Call system, the operator...
  • Page 248 An operable 1X (voice/ DURING OR AFTER AN ACCIDENT), THE data) or 3G(data) network and GPS signal recep- UCONNECT FEATURES, APPS AND SERVICES, tion is required for the 9-1-1 Call system to function AMONG OTHERS, WILL NOT OPERATE.
  • Page 249 248 UCONNECT 8.4A/8.4AN • The Phone Screen will display the following message WARNING! (Continued) “Vehicle phone requires service. Please contact your • Modifications to any part of the 9-1-1 Call system dealer.” could cause the air bag system to fail when you •...
  • Page 250 • The vehicle’s electrical systems are not intact. ALWAYS obey traffic laws and pay attention to the • The 9-1-1 Call system software and/or hardware are road. Some Uconnect Access services, including 9-1-1 damaged during a crash. and Assist, will NOT work without an operable 1X •...
  • Page 251 250 UCONNECT 8.4A/8.4AN NOTE: General Information • Your vehicle may be transmitting data as authorized This device complies with Part 15 of the FCC Rules. by the subscriber. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) •...

  • Page 252: Remote Service Features

    UCONNECT 8.4A/8.4AN 251 REMOTE SERVICE FEATURES If your vehicle is equipped with Remote Service Features, for more information, refer to moparownerconnect.com or for U.S. residents call: 1-855-792-4241 For Canadian residents call: 1-855-209-8317...

  • Page 254: Uconnect Settings

    UCONNECT SETTINGS CONTENTS Uconnect 8.4 Settings ....254...
  • Page 255 “Settings ” button on the touchscreen to display the menu setting screen. In this mode, the Uconnect system allows you to access all of your programmable features. NOTE: • Only one touchscreen area may be selected at a time.
  • Page 256 Up or Down Arrow button on the right side of the screen will allow you to toggle up or down through the available settings. Refer to “Uconnect Settings” in the Owner’s Manual on the DVD for further information.

  • Page 258: Voice Recognition Quick Tips

    VOICE RECOGNITION QUICK TIPS CONTENTS ▫ Uconnect Access ..... .266 UCONNECT 8.4A/8.4AN VOICE RECOGNITION QUICK TIPS ......258 ▫...

  • Page 259: Uconnect 8.4A/8.4An Voice Recognition Quick Tips

    It provides the key Voice Commands and All you need to control your Uconnect system with your tips you need to know to control your Uconnect 8.4A or voice are the buttons on your steering wheel. 8.4AN systems.
  • Page 260 VOICE RECOGNITION QUICK TIPS 3. Speak clearly at a normal pace and volume while facing straight ahead. The microphone is positioned on the rearview mirror and aimed at the driver. 4. Each time you give a Voice Command, you must first push either the VR or Phone button, wait until after the beep, then say your Voice Command.

  • Page 261: Basic Voice Commands

    260 VOICE RECOGNITION QUICK TIPS Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect system. Push the VR button . After the beep, say • Cancel to stop a current voice session •...

  • Page 262: Media

    VOICE RECOGNITION QUICK TIPS • Tune to Satellite Channel Hits 1 Media Uconnect offers connections via USB, SD, Bluetooth and TIP: At any time, if you are not sure of what to say or auxiliary ports. Voice operation is only available for want to learn a Voice Command, push the VR button and connected USB and iPod devices.

  • Page 263: Phone

    USB device. Your Voice Making and answering hands-free phone calls is easy Command must match exactly how the artist, album, with Uconnect. When the “phonebook” button is illumi- song and genre information is displayed. nated on your touchscreen, your system is ready. Check UconnectPhone.com for mobile phone compatibility...

  • Page 264: Voice Text Reply

    1. Once an incoming text message is read to you, push the Phone button . After the beep, say: “Reply.” 2. Listen to the Uconnect prompts. After the beep, repeat one of the pre-defined messages and follow the system prompts.
  • Page 265 264 VOICE RECOGNITION QUICK TIPS PRE-DEFINED VOICE TEXT REPLY RESPONSES Okay. Where are you? I will be <num- ber> minutes Are you there Call me. late. yet? I’ll call you I need See you in later. directions. <number> min- utes. I’m on my way.

  • Page 266: Climate

    • Set driver temperature to 70 degrees Navigation • Set passenger temperature to 70 degrees The Uconnect navigation feature helps you save time and become more productive when you know exactly how to TIP: Voice Command for Climate may only be used to get to where you want to go.

  • Page 267: Uconnect Access

    1. To enter a destination, push the VR button . After the beep, say • For the 8.4A Uconnect System, say... “Enter state” • For the 8.4AN Uconnect System, say... “Navigate to 800 Chrysler Drive Auburn Hills, Michigan” 2. Then follow the system prompts.
  • Page 268 Yelp Search An included trial and/or subscription is required to take Voice Texting advantage of the Uconnect Access services in the next Roadside Assistance Call section of this guide. To register with Uconnect Access, Wi-Fi Hotspot*** press the Apps button on the 8.4-inch touchscreen to get...

  • Page 269: Register

    3. A helpful Uconnect Care Agent will register your vehicle and handle all of the details. To unlock the full potential of Uconnect Access in your vehicle, you first need to register with Uconnect Access. Signing up is easy! Simply follow the steps above. Or, press the “Apps...
  • Page 270 Link. 5. Next time you’re in your vehicle, enable Bluetooth, pair your phone and select the Via Mobile app you want to play from the Uconnect touchscreen to stream your personalized music. NOTE: • You can also complete this process on the web. Simply visit moparownerconnect.com log in and click Set Up...

  • Page 271: Voice Texting

    270 VOICE RECOGNITION QUICK TIPS Voice Texting You must be registered with Uconnect Access and have a compatible MAP – enabled smartphone to use your voice 1. To send a message, push the Phone button . After to send a personalized text message. For details about the beep, say the following command: “Send mes-...

  • Page 272: Yelp

    • Messages are limited to 140 characters. • The Messaging button on the touchscreen must be illuminated to use the feature. Yelp Once registered with Uconnect Access, you can use your voice to search for the most popular places or things iPhone Notification Setting around you.
  • Page 273 , then say: “YELP search.” 4. Listen to the system prompts and after the beep, tell Uconnect the place or business that you’d like Uconnect to find. TIP: Once you perform a search, you can reorganize the results by selecting either the Best Match, Rating or...

  • Page 274: Siriusxm Travel Link

    5 - day weather forecast? SiriusXM Travel Link is a suite of services that brings a wealth of information right to your Uconnect 8.4AN system. (Not available for 8.4A system.) Push the VR button .

  • Page 275: Siri Eyes Free - If Equipped

    Siri help you perform useful tasks. To enable Siri push and hold, then release the Uconnect Voice Recognition (VR) button on the steering wheel. After you hear a double beep you can ask Siri to play...
  • Page 276 VOICE RECOGNITION QUICK TIPS 1. Pair your Siri enabled device to the vehicles sound system. Refer to “Uconnect Phone” in “Uconnect 8.4A/8.4AN” for a detailed pairing procedure. 1 — Select Settings on your 3 — Select Siri iPhone 4 — Enable Siri...
  • Page 277 276 VOICE RECOGNITION QUICK TIPS NOTE: A push and release of the button will start normal embedded VR functions. The push and hold, then release of the button will start Siri functions. 2. After the double beep, begin speaking to Siri. Examples of Siri commands and questions: •...

  • Page 278: General Information

    VOICE RECOGNITION QUICK TIPS 2. This device must accept any interference that may be received including interference that may cause unde- sired operation. NOTE: • The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not ex- pressly approved by the party responsible for compli- ance could void the user’s authority to operate the device.

  • Page 279: Additional Information

    Yelp logo, Yelp burst and related marks are registered trademarks of Yelp. For Uconnect system support, call: 1-877-855-8400 (24 hours a day 7 days a week) or visit DriveUconnect.com. Uconnect Access services support, call: 1-855-792-4241 Please have your Uconnect Security PIN ready when you call.
  • Page 280 Printed in the USA ©2015 FCA US LLC. All Rights Reserved. Chrysler, Dodge, Jeep, Ram, Mopar and Uconnect are trademarks of FCA US LLC. FIAT is a registered trademark of FCA Group Marketing S.p.A., used under license by FCA US LLC.

This manual is also suitable for:

8.4

Table of Contents