Table of Contents
Advertisement
SC-B6000 Series
User's Guide
Item
Printer Setup
Roll Paper
Setup
Using the Control Panel Menu
Description
Auto Cut
On
Off
Refresh
On
Margin
Off
Page Line
On
Off
Roll Paper
Normal
Margin
Top15mm/
Bottom15mm
Top45mm/
Bottom15mm
Top15mm/
Bottom150mm
3mm
15mm
Roll Paper
On
Remaining
Off
Remaining
1 to 15 m (4 to 50 ft)
Alert
48
Choose On to automatically cut roll paper using
the built-in cutter as each page is printed, Off to
disable auto paper cutting.
If On is selected during borderless printing, the
printer will automatically trim the leading edge to
remove any ink stains that may have been left by
the previous copy; to disable this feature, choose
Off. However, borderless printing is not
guaranteed on this printer.
If Auto Cut is Off, you can choose to print (On) or
not print (Off) cut lines on roll paper. Cut lines are
not printed if Auto Cut is On.
When set to Normal, the top and bottom margins
are 15 mm, and the left and right margins are 3
mm.
Except for 15mm, the left and right margins for all
other settings are 3 mm.
"Printable area" on page 37
U
Select whether to display/record (On) or not to
display/record (Off) the amount of remaining roll
paper. Roll Paper Remaining can be enabled by
selecting On and entering the length of the roll.
Displayed when On is selected for Roll Paper
Remaining.
Set within a range from 1 to 15 m (4 to 50 ft) to
display a warning when the amount of remaining
roll paper drops below that limit. You can set in 1 m
(4 ft) increments.
Advertisement
Table of Contents
