Replacing Maintenance Boxes - Epson SC-B6000 User Manual

SC-B6000 Series User's Guide
J
Fill the ink tank with the ink from the ink pack.
Insert the spout of the ink pack into the ink tank
ink inlet groove and slowly tilt to pour out the
ink.
c
Important:
Get all the ink out of the ink pack so that there
is none remaining.
Do not use the ink in an ink pack to refill
multiple different ink tanks.
This can cause messages from the remaining
ink warning system to not be displayed
properly.
Maintenance
K
Put the ink inlet cap back on the ink tank.
L
Close the slider ink inlet cover.

Replacing Maintenance Boxes

If the message No Enough Space is displayed, replace
the specified Maintenance Box.
Supported Maintenance Boxes
"Options and Consumable Products" on
U
page 71
c
Important:
Do not reuse maintenance boxes that have been
removed and left out in the open for a long period of
time. The ink on the inside will be dry and hard and
will be unable to absorb enough ink.
58