Table of Contents
Advertisement
Cleaning the fluff
filter
30
Bobbling (fluff) occurs as clothes etc. are used. These
bobbles come off during the drying cycle and collect
in the fluff filter.
0.
The filter must be cleaned after each drying cycle. A
clogged filter results in longer drying times and higher
energy consumption.
1. Open the door.
2. Pull out the filter.
3. Remove the fluff (by drawing your hand across the
filter).
4. Replace the filter (it can only be inserted one way
round).
5. Close the door.
Cleaning during a cycle
If the Clean the fluff filter" indicator lamp comes on
and a buzzer sounds while the dryer is on, clean the
filter immediately.
1. Allow the appliance to cool slightly and then clean
the filter as described above.
2. Press the Start/Stop button.
i Very dirty or blocked filters should be rinsed under
warm running water.
The filter must be dried thoroughly before being
replaced.
Cleaning nozzle
0.
d
For removing dry fluff from the door only.
Over time, fluff from the drying process collects in the
door. This fluff can be easily removed using the nozzle
provided.
Attach the nozzle to your vacuum cleaner and va
cuum the fluff from the door.
0.
Hide quick links:
Advertisement
Table of Contents
