drying programme ...
e sensitive and only
he Start/Stop button
the dryer with
Drum interior light
(depending on model)
Empty container after each drying operation!
Pull out condensation container keeping it horizontal.
Pour out condensation.
Always push container in fully until it clicks into place.
If Empty water flashes in the display panel
Cleaning the fluff filter
Clean the fluff filter after each drying operation.
Open the door, remove fluff from door/door area.
Pull out and fold open the fluff filter.
Remove the fluff (by wiping the filter with your hand).
If the fluff filter is very dirty or blocked, rinse with warm water and dry
Close and reinsert the fluff filter.
Switching off the dryer
Turn the programme selector to Off.
Do not leave laundry in the dryer.
Removing the laundry
The automatic anti-crease function causes the drum to move at specific intervals, the washing remains
loose and fluffy for an hour (two hours if the additional Less Ironing function is also
selected-depending on model).
once lights up in the display.
removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed.
The programme selected must then be resumed and completed.
Never switch the dryer off before the drying process has ended.
Drum and door may be hot!
Open door, the drying process is interrupted.
Load or remove laundry and close door.
If required, select a new programme and additional functions.
Press the Start/Stop button.
What to do if..., Page 10.