Cleaning The Fluff Filter; The Dryer; Removing The Laundry - Siemens WT34A101IN Installation And Operating Instructions Manual

Table of Contents

Advertisement

e using the dryer for the first time
drying cycle without any laundry
page 7.
Inspecting

the dryer

nnecting the
mains plug
oading laundry
he programme
1
drying programme ...
2
idual requirements
e overview,
page 7.
3
s the
Start button
erate the dryer with the
r inserted.
page 6.
r the programme
olyamide, elastane
Drying
Control panel
Drum
Fluff filter
Drying

Cleaning the fluff filter

Clean the fluff filter after each drying cycle.
1.
Open the door and pull out the fluff filter.
2.
Remove the fluff (brush your hand over the fluff filter).
If the fluff filter is very dirty or blocked, wash it out with warm water and
dry thoroughly.
3.
Insert the fluff filter so that you hear it engage.
4.
Remove fluff from door/door area.
Switching off the dryer
Turn the programme selector to Off.
Do not leave laundry in the dryer.

Removing the laundry

Your dryer has an automatic anti-crease function. The drum is moved at set intervals for 30 minutes after
the programme has ended. Laundry remains loose and fluffy (for 90 minutes, if additional
function is selected - depending on model).
End of programme
as soon as the
Interrupting the programme
The drum and door may be hot.
The drying programme can be interrupted briefly for loading or removing laundry. The selected
programme must then continue to run to the end.
1. Open the door; the drying process is interrupted.
2. Load or remove laundry and close the door.
3. If required, select a new programme and additional functions.
4. Press the
Start button.
3
(finished/anti-crease) indicator light flashes
Loading or removing laundry
(Easy-Iron)
4

Advertisement

Table of Contents
loading

Table of Contents