Ceramic Fuel Bed Refitting - Baxi 741FS Owner's Manual

OWNER GUIDE

CERAMIC FUEL BED REFITTING

The installer and owner guide for the ceramic fuel effect is separate from this guide. The
installer may have attached it to this guide or placed it inside. It is important that the
installer and owner guide for the ceramic fuel effect is followed correctly. If replacing
the ceramic fuel effect, where a new guide is supplied, follow the installer and owner
guide supplied with the replacement fuel effect.
Keep the replacement installer and owner guide with this owner guide for future
reference.
MAINTENANCE
Battery replacement.
This appliance requires one 9V PP3 Ever Ready Silver Seal (or equivalent) battery.
To replace the battery remove the bottom front cover casting.
Fit the new battery firmly to the connections on the ignition block (See figure 4).
Regular maintenance.
In order to achieve and maintain high levels of personal safety and performance
efficiency, it is essential that the opening at the back of the fire and the flue are kept
clear of any form of obstruction. It is possible that deposits of mortar or soot could fall
and accumulate causing the flue to be
blocked or restricted and so preventing
proper clearance of dangerous exhaust
fumes.
In the United Kingdom it is the law that a
landlord must have any gas appliance, flue
and pipework which is situated in a tenant's
premises checked for safety at least every
twelve months by a competent person (In
the U.K, a CORGI registered installer).
We recommend that all gas appliances and
their flues, wherever situated, are checked
annually.
Figure 4. Battery fitting
Page 10