Inset live fuel effect gas fire, fitted with one of the following fascia. amour, aspect, aspect glass, eclipse, fascination, landscape, serenity, tranquility or visia (42 pages)
Page 1
Telephone 08706 061 065 (National call rates apply in the United Kingdom). In the Republic of Ireland telephone 0044 8706 061 065. This guide is intended to help you care for your Baxi Fires Division gas fire. Please read thoroughly before using and keep for future reference.
Page 2
BS EN ISO 9001 quality system accepted by the British Standards Institute. The Highest Standards Baxi Fires Division is a member of the Society of British Gas Industries which works to ensure high standards of safety, quality and performance. Careful Installation Baxi Fires Division is a CORGI registered company.
OWNER GUIDE LIST OF CONTENTS Section Page SAFETY GAS CONSUMPTION APPLIANCE DIMENSIONS OPERATING YOUR FIRE The Oxysafe flame sensing and flue blockage safety system. To light the fire. To turn off. Glass bowing. Lighting with a taper. CLEANING YOUR FIRE Metal Parts.
OWNER GUIDE SAFETY IF YOU SMELL GAS DON’T SMOKE EXTINGUISH ALL NAKED FLAMES DON’T TURN ELECTRICAL SWITCHES ON OR OFF TURN OFF THE GAS SUPPLY AT THE METER OPEN DOORS AND WINDOWS TO GET RID OF THE GAS IMMEDIATELY CALL THE GAS EMERGENCY SERVICE - SEE YOUR LOCAL TELEPHONE DIRECTORY Do have the fire installed by a competent person.
Don’t attempt to clean or service the fire until it has been switched off and allowed to cool completely. GAS CONSUMPTION Model 754 when fitted with Amour, Aspect, Eclipse, Landscape and Serenity fascia. Has a maximum natural gas input of 5.1kW (Gross) Has a maximum natural gas output of 2.6kW Has a minimum natural gas input of 3.0kW (Gross)
OWNER GUIDE OPERATING YOUR FIRE PLEASE NOTE When operating your fire for the first time, some vapours may be given off which may cause a slight odour and could possibly set off any smoke alarms in the immediate vicinity. These vapours are quite normal with new appliances. They are totally harmless and will disappear after a few hours use.
Page 8
OWNER GUIDE Keep the button at the PILOT/IGN position for a further ten seconds. This will prevent the flame sensing device from shutting off the gas while its probe warms up as explained previously. If the pilot does not ignite quickly repeat the procedure.
OWNER GUIDE formed during previous operations. iv) If operating the appliance for long periods it is beneficial occasionally to change the settings. This will also help to remove any carbon deposits that may form during operation. Glass bowing. It is normal for the glass panel on the fascia to bow slightly when hot.
OWNER GUIDE CLEANING YOUR FIRE To maintain the high performance and quality finish of your fire please follow these guidelines: Before attempting to clean the fire, please remember to turn off the fire and wait for the appliance to cool completely. The fire will retain heat for some time before cleaning can begin.
OWNER GUIDE inside or attached to this guide by the installer. Burner. Remove any deposits of soot or other foreign matter from the solid areas of the burner with a dry soft brush. Be careful not to brush any particles into the open holes. Remove any particles from the holes with a vacuum cleaner fitted with a soft brush attachment.
OWNER GUIDE Servicing. In the United Kingdom servicing can be carried out either by a Baxi Fires Division service engineer or a CORGI registered installer. If you require your fire to be serviced, please contact Baxi Fires Division Service on 08706 090 081 and quote the following details;...