Burner; Ceramic Fuel Bed Refitting; Maintenance; Battery Replacement - Baxi 740FS Owner's Manual

brushing with the pieces held away from your face so that you avoid inhaling the dust.
We do not recommend the use of a normal domestic vacuum cleaner which may
!
blow dust back into the air.
We suggest that you remove the ceramic fuel effect pieces in the reverse order to
!
that shown in the fuel bed refitting instructions.

Burner.

Remove any deposits of soot or other foreign matter from the surface of the burner with
a dry soft brush. Be careful not to brush any particles into the open slots. Remove any
particles from the slots with a vacuum cleaner fitted with a soft brush attachment. Do
not poke wire, etc. into the slots in the burner.
The installer and owner guide for the ceramic fuel effect is separate from this guide. The
installer may have attached it to this guide or placed it inside. It is important that the
installer and owner guide for the ceramic fuel effect is followed correctly. If replacing
the ceramic fuel effect, where a new guide is supplied, follow the installer and owner
guide supplied with the replacement fuel effect.
Keep the replacement installer and owner guide with this owner guide for future
reference.

Battery replacement.

This appliance requires one 9V PP3 Ever
Ready Silver Seal (or equivalent) battery.
Fit the new battery firmly to the
connections on the ignition block (See
figure 3).

Regular maintenance.

In order to achieve and maintain high
levels of personal safety and performance
efficiency, it is essential that the opening at
the back of the fire and the flue are kept
clear of any form of obstruction. It is
possible that deposits of mortar or soot could fall and accumulate causing the flue to be
blocked or restricted and so preventing proper clearance of dangerous exhaust fumes.
In the United Kingdom it is the law that a landlord must have any gas appliance, flue
OWNER GUIDE

CERAMIC FUEL BED REFITTING

MAINTENANCE

Figure 3. Battery fitting
Page 9