1. Manuals
  2. Brands
  3. Baxi Manuals
  4. Indoor Fireplace
  5. 741
  6. Owner's manual

Baxi 741 Owner's Manual

Inset live fuel effect gas fire
Hide thumbs Also See for 741:
Table of Contents

Advertisement

Quick Links

INSET LIVE FUEL EFFECT GAS FIRE
THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20).
WHEN CONVERTED USING CONVERSION KIT NO. 0595211 THIS APPLIANCE
THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION IN THE UNITED
KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE).
We trust that this guide gives sufficient details to enable your appliance to be operated
and maintained satisfactorily. However, if further information is required, our
Baxi Fires Division Technical Helpline will be pleased to help.
Please telephone 08706 061 065 (National call rates apply in the United Kingdom). In
This guide is intended to help you care for your Baxi Fires Division gas fire. Please read
© Baxi Heating U.K. Ltd.
OWNER GUIDE
Model 741
Blenheim
Sonnet
(GC No. 32-032-56)
IS FOR USE WITH PROPANE GAS (G31).
the Republic of Ireland telephone 0044 8706 061 065.
thoroughly before using and keep for future reference.
This guide to be left with the owner.
Fitted with
or
fascia
5112225/01

Advertisement

Table of Contents
loading

Related Manuals for Baxi 741

Summary of Contents for Baxi 741

  • Page 1 Please telephone 08706 061 065 (National call rates apply in the United Kingdom). In the Republic of Ireland telephone 0044 8706 061 065. This guide is intended to help you care for your Baxi Fires Division gas fire. Please read thoroughly before using and keep for future reference.
  • Page 2 BS EN ISO 9001 quality system accepted by the British Standards Institute. The Highest Standards Baxi Fires Division is a member of the Society of British Gas Industries which works to ensure high standards of safety, quality and performance. Careful Installation Baxi Fires Division is a CORGI registered company.

  • Page 3: Table Of Contents

    OWNER GUIDE LIST OF CONTENTS Section Page SAFETY APPLIANCE DIMENSIONS GAS CONSUMPTION OPERATING YOUR FIRE The Oxysafe flame sensing and flue blockage safety system. To light the fire. Lighting with a taper. CLEANING YOUR FIRE Metal Parts Ceramic fuel effect pieces and burner compartment walls. Burner.

  • Page 4: Safety

    OWNER GUIDE SAFETY IF YOU SMELL GAS DON’T SMOKE EXTINGUISH ALL NAKED FLAMES DON’T TURN ELECTRICAL SWITCHES ON OR OFF TURN OFF THE GAS SUPPLY AT THE METER OPEN DOORS AND WINDOWS TO GET RID OF THE GAS IMMEDIATELY CALL THE GAS EMERGENCY SERVICE - SEE YOUR LOCAL TELEPHONE DIRECTORY Do have the fire installed by a competent person.

  • Page 5: Appliance Dimensions

    OWNER GUIDE Do provide a suitable guard that complies with BS 8423 for the protection of young children, the elderly and the infirm. Such a guard is also recommended for the protection of pet animals. (Although this fire conforms to all the applicable standards, it is a heating appliance and certain parts of its surface will become hot).

  • Page 6: Gas Consumption

    Has a minimum natural gas input of 2.3kW (Gross) Has a minimum natural gas output of 0.09kW Model 741 when converted using kit number 0595211 Has a maximum propane gas input of 6.7kW (Gross) Has a maximum propane gas output of 3.71kW Has a minimum propane gas input of 4.0kW (Gross)

  • Page 7: To Light The Fire

    OWNER GUIDE To light the fire. Depress the control knob and rotate it anticlockwise to the pilot ignition position. A 'click' will be heard as the integral piezo operates. A flame should appear at the pilot. Keep the control knob depressed and hold the pilot ignition position for five seconds. When the control knob is released the pilot flame should remain lit.

  • Page 8: Lighting With A Taper

    OWNER GUIDE Lighting with a taper. (See figure 3). In the unlikely event of failure of the ignition spark, the pilot can be lit by a taper or long spill. Turn the control knob to the 'Pilot ignition' position Insert the taper or spill between the second and third left hand ceramic fuel effect pieces on the first row Depress the control knob.

  • Page 9: Burner

    OWNER GUIDE should be removed from the fire for cleaning. Cleaning should be carried out in a well ventilated area or in the open air by gently brushing with the pieces held away from your face so that you avoid inhaling the dust. We do not recommend the use of a normal domestic vacuum cleaner which may blow dust back into the air.
  • Page 10 OWNER GUIDE 2. Place the ceramic front coal in position in front of the base coal. The front of the ceramic coal should touch the front of the burner module (See figure 5). The loose ceramic coals are supplied in three sizes.
  • Page 11 OWNER GUIDE 5. Locate four small ceramic coals into the spaces on top of the first row of ceramic coals (See figure 7). 6. Place a medium ceramic coal into the central valley in the rear ceramic base. It is important that this medium ceramic coal has a space behind it.

  • Page 12: Maintenance

    Servicing. Servicing can be carried out either by a Baxi Fires Division Service engineer or a CORGI registered installer. If you require your fire to be serviced, please contact Baxi Fires Division Service on 08706 090 081 and quote the following details. These can be found on a plate located below the burner and behind the lower front cover.

Table of Contents