Ceramic Fuel Effect Refitting; Fitting The Lower Firefront - Baxi 939 Owner's Manual

CERAMIC FUEL EFFECT REFITTING

The installer and owner guide for the ceramic fuel effect is separate from this guide. The
installer may have attached it to this guide or placed it inside. It is important that the
installer and owner guide for the ceramic fuel effect is followed correctly. If replacing
the ceramic fuel effect, where a new guide is supplied, follow the installer and owner
guide supplied with the replacement fuel effect.
Keep the replacement installer and owner guide with this owner guide for future
reference.
Decorative firefront.
Place the decorative firefront on the hearth and
centralise to the appliance.
'Quattro' and 'Anthem' firefront only
Note:Before removing the 'Quattro' / 'Anthem'
firefront it is necessary to remove the ceramic fuel
effect.
Remove the fuel effect
!
carefully and place aside. We
recommend that the fuel
effect is removed in the
reverse order to that shown
in the fitting sections.
Remove the lower
!
'ashpan'.
Lift the firefront clear of
!
the burner.
To fit the firefront, locate
!
the firefront as in figure 4.
The hooks should fit into the
slots on the burner tray.
The lower 'ashpan'
!
should be located as in figure
5.
©
Baxi Heating U.K. Limited 2006.
OWNER GUIDE

FITTING THE LOWER FIREFRONT

Figure 5. Lower 'ashpan'
location
Figure 4. Hanging the firefront
Page 11