Preferences: General Control - Korg pa800 User Manual

Preferences: General Control

In this page, you can set various general parameters.
Note: These settings are stored in the Song Play Setup area of the
Global file (together with all the other parameters marked with the
Sng abbreviation through the manual). After changing these
settings, select the Write Global-Song Play Setup command from
the page menu to save them to the Global.
Midi Setup
MIDI channels for the Song Play mode can be automatically
configured by selecting a MIDI Setup with this parameter. See
"MIDI" on page 252 for more information on using MIDI Set-
ups.
Note: To automatically select a MIDI Setup when entering the
Song Play mode, select the Write Global-Song Play Setup command
from the page menu.
For detailed information on MIDI Setup settings, see "MIDI
Setup" on page 299.
Note: After selecting a MIDI Setup, you can go to the Global mode
and apply any change to each channel setting. To store these
changes to a MIDI Setup, while still in Global mode select the Write
Global-Midi Setup command from the page menu. All MIDI Set-
ups can be freely customized and overwritten.
Hint: To restore the original MIDI Setups, load the original Fac-
tory data again (downloadable from www.korgpa.com).
Performance recalls FX CD
This parameter selects the effects mode for the Performance.
Off When selecting a Performance, no effect is
selected.
On The Performance selects the C/D effect pair.
Note: When both this parameter and the "Seq.2 FX
Mode" parameter are set to select the C/D effect
pair, Sequencer 2 shares its effects with Keyboard
tracks. Therefore, these effects can be changed either
selecting a Song for Sequencer 2, or selecting a Per-
formance.
Song Play operating mode
Lyrics/Markers Balance Link
This parameter allows you to use the SEQUENCER BALANCE
slider to select the Sequencer whose lyrics or markers will be
shown in the built-in display, and whose lyrics will be shown on
the external monitor (provided the optional VIF4 video interface
card is installed).
Off When moving the SEQUENCER BALANCE
cross-fader, only the volume balance between
Songs will be selected. The shown lyrics or mark-
ers will remain unchanged.
On When moving the SEQUENCER BALANCE
slider fully to the left or the right, the correspond-
ing Song will fade-in, and its lyrics and markers
will be selected and shown in the display or exter-
nal monitor.
Lyrics
Markers
Seq.1
Sng
Link Mode
The two onboard Sequencers can work each one with a different
Tempo (Off), or use both the same Tempo (various Link
modes).
You can turn the Link Mode on by pressing the TEMPO LOCK
button and turning its LED on (by default, Beat mode is selected
the first time). This also turns the Tempo Lock function on.
Hint: You can always start both sequencers simultaneously, by
keeping the SHIFT button held down while pressing one of the
(PLAY/STOP) controls.
Off The sequencers Tempo are not linked. Each
sequencer uses its own Tempo.
Measure The two sequencers Tempo are linked together.
The Tempo data written into the Songs are
ignored. Adjust the Tempo using the TEMPO/
VALUE controls.
Sng
Start one of the sequencers, by pressing its own
other sequencer, by pressing the other
(PLAY/STOP) control; the second sequencer
starts at the next measure.
Beat The two sequencer's Tempo are linked together.
The Tempo data written into the Songs are
ignored. Adjust the Tempo using the TEMPO/
VALUE controls.
Start one of the sequencers, by pressing its own
other sequencer, by pressing the other
(PLAY/STOP) control; the second sequencer
starts at the next beat (quarter or octave, depend-
ing on the Song's Time Signature).
Preferences: General Control
Lyrics
Markers
Seq.2
(PLAY/STOP) control. Then, start the
(PLAY/STOP) control. Then, start the
169
Sng
Sng