General Controls: Interface - Korg pa800 User Manual

General Controls: Interface

This page contains parameters related to the way messages are
shown in the display.
Help Language
Language
Use this pop-up menu to select one of the available languages for
the online help system.
Change button
Press this button to apply the selected language to the user's
interface.
How to select the Help language
1. Since Pa800 must be reset at the end of this procedure, be
sure to first save all unsaved data.
2. While in this page, select a language from the pop-up
menu.
3. The Change button will start flashing in red. Press it.
4. You will be asked if you want to save the Global, and select
the new language. Press Yes to confirm. The Global will be
automatically saved, and the language selected.
5. A message will advice you to reboot the Pa800. Press OK to
close the message window.
6. Turn the Pa800 off, then on again.
Background color
Color
Use this parameter to choose a different background color for
the display. Possible choices are Default, and from 1 to 6.
Program Change
Show Program Change number
Check this parameter to show Program Change numbers next to
Sound names in the Sound Select window. By default, this
parameter is turned on.
Note: Program Change numbers are always shown in Sound Edit
mode, and in the various Track Info areas.
Track Activity
Show Track Activity
Use this parameter to turn on/off the Track Activity display.
When it is turned on, you can monitor events coming from the
tracks or the MIDI inputs. Incoming events are shown by the
changing color of each track's label.
Here is the list of colors and their meaning:
Red Data coming from the MIDI IN ports.
Green Internal data, generated by the keyboard, pads,
the Arranger or one of the Sequencers.
Grey Either internally or externally generated data (or
both at the same time).
Dark Blue No data received.
Gbl
Auto Select
Auto Style Select
Auto Performance/Sound Select
When one of these parameters is checked, the latest selected
Style, Performance or Sound selected in a bank is immediately
selected when pressing the bank button.
This way, you can assign your preferred Style, Performance or
Sound to each control panel's button, and select it just with a
single press.
However, the Style/Perf/Sound Select window still appears when
you press one of the bank buttons, so you can select a different
item if desired.
Note: Unless you save your settings by means of the "Write Global-
Auto Select Setup" page menu command, the memorized Style,
Performance or Sound is reset to the first one in each bank, when
turning the instrument off and then on again.
Hint: You can save your preferred Performances into the first loca-
tion of each bank. This way, by turning on this parameter, you will
select your preferred Performance at the touch of a single button.
Also note that, by turning the "Factory Style and Pad Protect" an
"Factory Sound Protect2 parameters off, you can do the same with
Gbl
the Styles and Sounds.
Gbl
Global edit mode
General Controls: Interface
211
Gbl
Gbl
Gbl