Mixer/Tuning: Eq Gain - Korg pa800 User Manual

Depending on the status of the "Seq.2 FX Mode" parameter,
Sequencer 2 might use the C/D effect pair (see page 170).
Furthermore, in Sequencer mode you can create Songs using all
four effects (see "Effects: FX Select" on page 195).
Use the TRACK SELECT button to switch from Keyboard to
Song tracks, and vice-versa.
Note: When you stop, then start the Song again, or select a different
Song, the default Song track settings are selected again. You can,
however, pause the Song, change the effects, then exit from pause
and start the Song again. Edit the Song in Sequencer mode to per-
manently change the effects.
Send level (A...D)
0...127 Level of the track (direct) signal sent to the effect
processor.
Play/Mute icon
Track's play/mute status. See "Keyboard track status" on
page 155 for more information.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Song Play operating mode

Mixer/Tuning: EQ Gain

In this page you can set the three-band equalization (EQ) for
each individual track.
Use the TRACK SELECT button to switch from the Keyboard to
the Song tracks, and vice-versa.
Note: The EQ is different for Sequencer 1 and Sequencer 2.
Hint: Track EQ can be memorized in the general preferences for the
Song Play mode (they are named Song Play–Global Setup). This
will help adapting the Pa800's sound to personal taste for any
MIDIfile you will ever play. Need a lighter Bass track? Save the
right equalization, and the Bass will stay light with all the subse-
quent Songs.
Hi (High) Gain
Sng
This parameter lets you adjust the high frequencies equalization
on each individual track. This is a shelving curve filter. Values are
shown in decibels (dB).
Mid (Middle) Gain
This parameter lets you adjust the middle frequencies equaliza-
tion on each individual track. This is a bell curve filter. Values are
shown in decibels (dB).
163
Mixer/Tuning: EQ Gain
Sng
Sng