Loop Mode; Control Mode - Korg SQ-64 Owner's Manual

SQ-64 Owner's Manual
■ Parameters that can be configured in modulation mode
Operation PARAM1 PARAM2
option
Operation by Increases/ Rotates the
knob decreases all modulation
modulation values. values of the
(in units of 0.5) sequence. (by
step) [64<...>64]
While holding Increases/ Rotate the
down SHIFT decreases all the modulation values
modulation values. of the sequence.
(in units of 10) [L64...CENTER...
R64]
-
While holding Increases/
down 64 decreases the
pads modulation value
for the selected
steps. (in units of
0.5)

Loop mode

Press the LOOP button to enter loop mode.
In this mode two types of loops can be created.
RANGE
Press a step to determine the start step of the loop,
then select the next step while pressing the first step to
determine the last step of the loop. Double tap any step of
the loop to release the loop.
SELECT
Press any number of steps. The sequence will automatically
start playing only the selected steps. When any step is
released it will be removed from the loop. Double tap any
step of the loop to release the loop.
PARAM3 PARAM4
Sets the probability Sets the
of a random interpolation curve
variation of the of modulation CV
modulation values. [NONE, LINEAR,
[0%-100%] EXP].
Sets the range Sets how the
of random modulation should
modulation value be output via MIDI
variations. [0%- [ VELO. , CC 0, ... ,
100%] CC 127 ]
Sets the probability Sets the range
of a random of random
variation of the modulation value
modulation value variations for the
for the selected selected steps. [0
steps. [0%-100%] to 100%]
■ Parameters that can be configured in loop mode
Operation PARAM1
option
Operation by Sets the loop
knob tempo [1/64, ..1/2,
1x, 2x..16x].

Control mode

Press the CONTROL button to enter control mode.
In control mode the Track button A-D, the 64 pads
PARAM1-PARAM4 knobs act as dedicated MIDI controls.
The BAR button 1-4 can be used to select one of four pages of
assignments for the param knobs. To assign MIDI messages to
buttons and 64 pads, press A-13 to 16, B13 to 16, C13 to 16, and
D13 to 16 of the 64 pads to switch 16 types of control mappings
while pressing the CONTROL button in global mode.
Note The MIDI control message mapping presets can be edited using
an external editor/librarian. See "SQ-64 Editor" (www.korg.
com) for details.
18
PARAM2 PARAM3 PARAM4
Sets the Sets the loop Sets how the
probability that type [RANGE, sequence should
the next step in SELECT] resume when the
the loop is chosen loop is released.
at random. [0- [IN-PHASE, FREE]
100%]
, and the