Edit Menu; Edit Page Structure; Mixer/Tuning: Volume/Pan - Korg pa800 User Manual

Professional arranger
Hide thumbs Also See for pa800:
Table of Contents

Advertisement

192
Sequencer operating mode

Edit menu

Edit menu
From any page, press the MENU button to open the Sequencer edit
menu. This menu gives access to the various Sequencer edit sections.
When in the menu, select an edit section, or press EXIT to exit
the menu.
When in an edit page, press EXIT or the SEQUENCER button to
go back to the main page of the Sequencer operating mode.
Each item in this menu corresponds to an edit section. Each edit
section groups various edit pages, that may be selected by press-
ing the corresponding tab on the lower part of the display.

Edit page structure

All edit pages share some basic elements.
Operating mode
Edit section
Operating mode
This indicates that the instrument is in Sequencer mode.
Edit section
This identifies the current edit section, corresponding to one of
the items of the edit menu (see "Edit menu" on page 192).
Page menu icon
Press this icon to open the page menu (see "Page menu" on
page 202).
Parameters area
Each page contains various parameters. Use the tabs to select
one of the pages. For detailed information on the various types
of parameters, see sections starting from page 192.
Tabs
Use tabs to select one of the edit pages of the current edit section.

Mixer/Tuning: Volume/Pan

This page lets you set the volume and pan for each Song track.
Use the TRACK SELECT button to switch between Song tracks
1-8 and 9-16.
Page menu
icon
Selected
track info
Parameters
area
Dry
Use this checkbox to turn the dry (direct) signal on or off.
Note: If the track is sent to a separate output, no FX is sent to any
output. To program the output status for each track, see "Audio
Tabs
Setup: Seq1" on page 216.
On
Off
When checked, the direct, dry signal is sent to the
output, mixed with the FXs.
Track
Out L/R
FX Processor
When unchecked, the direct, dry signal is
removed from the audio output, and only sent to
the FXs. The effected signal will still be panned
(in stereo FXs only) according to the Pan value.
Track
Out L/R
FX Processor

Advertisement

Table of Contents
loading

Table of Contents