Page Menu - Korg pa800 User Manual

170 Song Play operating mode

Page menu

Seq.2 FX Mode
This parameter selects the effects mode for Sequencer 2. When a
4-effects Song is loaded, all four effects are used, independently
from this setting.
AB The A and B effect pair is used. Sequencer 2
shares its effects with Sequencer 1.
CD The C and D effect pair is used.
Note: When this parameter is set to CD, Sequencer
2 shares its effects with Keyboard tracks, so these
effects can be changed either selecting a Song for
Sequencer 2, or selecting a Performance (unless the
"Performance recalls FX CD" parameter is left
unchecked – see above).
Fast Play
When checked, this function allows to skip the empty setup
beats at the beginning of a song, and immediately start from the
first note. However, any setup data are read and considered.
Note: When Pa800 is driving an external musical instrument, the
fast transfer of MIDI data to the MIDI OUT or USB port may
cause a delay to the Song's start. Therefore, we suggest to turn this
function off when Pa800 is hooked to other instruments.
Get Hard Disk Path
Available only when a hard disk is installed.
Press this button to see the current path of each sequencer. This
lets you know where currently selected Songs are located in the
disk.
If you save these paths to the Global, by selecting the "Write Glo-
bal-Song Play Setup" command from the page menu, the first
time you will open the Song Select window, after turning the
instrument on, the selected path will be selected by default.
Sng
Page menu
Press the page menu icon to open the menu. Press a command to
select it. Press anywhere in the display to close the menu without
selecting a command.
Sng
Write Performance
Select this command to open the Write Performance dialog box,
and save most of the current control panel settings to a Perfor-
mance.
Sng
See "Write Performance dialog box" on page 106 for more infor-
mation.
Write Global-Song Play Setup
Select this command to open the Write Global-Song Play Setup
dialog box, and save global settings that are unique to the Song
Play mode.
See "Write Global-Song Play Setup dialog box" on page 171 for
more information.
Save Song Marker Seq.1/2
Select this command to save the markers created in the corre-
sponding sequencer (see "Markers side tabs" on page 158).
Export Jukebox List
Select this command to save the current Jukebox list as a text file
to a disk. Here is how it works.
1. While a Jukebox file is assigned to the sequencer, select the
Export Jukebox List command from the page menu.
2. A dialog box will appear, asking you to select either the
internal SSD-U memory or a storage device connected to
one of the USB Host ports.
3. Select an option, and press OK to confirm.
Note: When saved, the text file will be named after the selected
Jukebox file. For example, a Jukebox file named "Dummy.jbx" will