Removing A Hard Drive From A Hard Drive Carrier - Dell SD630-S Owner's Manual

Steps
1. If a hard drive blank is installed in the hard drive slot, remove it.
2. Install a hard drive in the hard drive carrier. For more information, see the Installing a hot swappable
hard drive into a hot swappable hard drive carrier section.
3. Press the release button on the front of the hard drive carrier and open the hard drive carrier handle.
4. Insert the hard drive carrier into the hard drive slot until the carrier connects with the backplane.
5. To lock the hard drive in place, close the hard drive carrier handle.
Next steps
Install the optional front bezel.
Figure 25. Installing a hot swappable hard drive
1. release button
3. hard drive or SSD carrier handle
Related Links
Installing a hot swappable hard drive into a hot swappable hard drive carrier
Safety instructions

Removing a hard drive from a hard drive carrier

Prerequisites
1. Keep the Phillips #1 screwdriver handy.
2. Remove the hard drive carrier from the system.
Steps
1. Remove the screws from the slide rails on the hard drive carrier.
2. Lift the hard drive out of the hard drive carrier.
86
2. hard drive or SSD carrier