Ports And Connectors Specifications; Usb Ports; Nic Ports; Serial Connector - Dell SD630-S Owner's Manual

Ports and connectors specifications

USB ports

The Dell SD630-S system supports:
• USB 2.0-compliant ports on the front panel
• USB 3.0-complaint ports on the back panel
• Internal USB 3.0-compliant port
Table 16. USB specifications
System
Dell SD630-S

NIC ports

The Dell SD630-S system supports four Network Interface Controller (NIC) ports on the back panel,
which is available in one of the following three NIC configurations:
• Four 10/100/1000 Mbps
• Two 10/100/1000 Mbps and two 100 Mbps/1 Gbps/10 Gbps
• Four 10 Gbps

Serial connector

The serial connector connects a serial device to the system. The Dell SD630-S system supports one serial
connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-
compliant.

VGA ports

The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The Dell
SD630-S system supports two 15-pin VGA ports on the front and back panels.

Video specifications

The Dell SD630-S system supports Integrated VGA controller with 16 MB capacity.
Table 17. Resolution information for video modes
Resolution
640 X 480
800 X 600
1024 X 768
Front panel
• Two 4-pin, USB 2.0-
compliant ports
• vFlash memory card
slot
Refresh rate (Hz)
60, 70
60, 75, 85
60, 75, 85
Back panel
Two 9-pin, USB 3.0-
compliant ports
Color depth (bit)
8, 16, 32
8, 16, 32
8, 16, 32
Internal
One 9-pin, USB 3.0-
compliant
27