Dell SD630-S Owner's Manual page 9

9. LCD panel
11. Hard drives (8)
Table 1. Front panel features of the eight x 2.5-inch Dell SD630-S hard drive chassis
Item Indicator, Button, or
Connector
1 Power-on indicator,
power button
2 NMI button
3 System identification
button
4 USB management port/
iDRAC Direct (2)
5 Optical drive (optional)
10. Video connector
12. Quick Sync
Icon Description
Enables you to know the power status of the
system. The power indicator turns on when the
system power is on. The power button controls
the power supply output to the system.
NOTE: On Advanced Configuration and
Power Interface (ACPI)-compliant operating
systems, turning off the system by using the
power button causes the system to perform a
graceful shutdown before power to the
system is turned off.
Enables you to troubleshoot software and device
driver errors when running certain operating
systems. This button can be pressed by using the
end of a paper clip.
NOTE: Use this button only if directed to do
so by qualified support personnel or by the
operating system documentation.
Enables you to locate a particular system within a
rack. The identification buttons are on the front
and back panels. When one of these buttons is
pressed, the LCD panel on the front and the
system status indicator on the back flash until one
of the buttons is pressed again.
To turn the system ID on or off, press the system
identification button.
If the system stops responding during POST, press
and hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset the iDRAC (if not disabled in F2 iDRAC
setup), press and hold the button for more than 15
seconds.
Functions as a regular USB port or provides access
to the iDRAC Direct features. For more
information, see the iDRAC Guide at Dell.com/
idracmanuals.
The ports are USB 3.0-compliant.
One optional SATA DVD-ROM drive or DVD+/-RW
drive.
9