Localnode Attributes; Opc Function; Printbuffer - Keithley 3720 User Manual

Series 3700 System Switch/Multimeter User's Manual
lan.trigger[N].wait()

localnode attributes

Use the attributes in this group to set the power line frequency, control (on/off) prompting,
control (hide/show) error messages on the display, to save/recall setup and other related local
node capabilities. Available commands:
localnode.define.MAX_TIMERS
localnode.define.MAX_DIO_LINES
localnode.define.MAX_TSPLINK_TRIGS
localnode.define.MAX_BLENDERS
localnode.define.MAX_BLENDER_INPUTS
localnode.define.MAX_LAN_TRIGS
localnode.linefreq
localnode.model
localnode.reset()
localnode.prompts
localnode.revision
localnode.showerrors

opc function

Use this function to set the OPC bit in the status register when all overlapped commands are
completed.
opc()

printbuffer

Use this function to print buffer information.

printbuffer()

Document Number: 3700S-900-01 Rev. A / August 2007
Section 6: ICL Command List
6-11