Computherm Q7 Operating Instructions Manual page 30

• After selecting the abbreviation that indicates the day to which you
wish to copy the program, press the "COPY" button to copy the
program. Hereafter, the abbreviation indicating the day to which the
program was copied will be visible continuously. Following this, you
can select further days using the large
copy the program to those days too by pressing the "COPY" button.
• Finally, press the "SET" button to save the modifications (if no
buttons are pressed for at least 15 seconds, the modifications will
be automatically saved). Afterwards, the device goes back to the
main screen. If required, the program of further days can be freely
copied by repeating the above steps.
ATTENTION! The "COPY" function is only available, if the days of the
week were programmed separately!
and
30
buttons and