Computherm Q7 Operating Instructions Manual page 27

g. The next step in programming is the adjustment of the start time
of switch , which is indicated on the display of the device
PROG
by flashing the time value to be adjusted ( by default). The
–
adjustment process of switches can be done
PROG PROG
(the same way as switch is adjusted) by repeating the
PROG
"e"-"f" steps.
If you do not want to activate any more switches for the
selected day(s), then press the "PROG" button without
changing the start time of the next switch from the default
. This way the programming of the selected day(s) is
finished, the thermostat offers another day to be programmed
and the programming can be continued from step "c".
–
If all the switches ( ) are activated for the selected
PROG PROG
day(s), then after setting the temperature value of , the
PROG
programming of the selected day(s) is finished, the thermostat
27