Programming The Thermostat; A Brief Introduction To Programming - Computherm Q7 Operating Instructions Manual

4. PROGRAMMING THE THERMOSTAT

4.1 A brief introduction to programming

• Programming means the setting of switching times and selection of
accompanying temperature levels. The device can be programmed
for a one-week period. Its operation is automatic, and it will cyclically
repeat the programs that have been keyed in. For each day, beside 1
fixed (
PROG
ing times can be set. For all switching times a different temperature
can be assigned between 5 and 35°C, in 0.5°C increments. The
temperature set for a given switch will remain valid until the start
time of the next switch. Accordingly, the thermostat will keep the
temperature set for switching time
is reached. After switching time
switch
PROG
) switching time, 6 adjustable
will be valid until the time of the next switch (
(
PROG
until switching time
PROG
the temperature selected to
PROG
18
– )
switch-
PROG
PROG
).
PROG