Table of Contents
Advertisement
3.3 Channel-Zero Encoding
This section is not applicable to DS-7100/7200HGHI-E1/E2 series DVR.
Purpose:
Sometimes you need to get a remote view of many channels in real time from web browser or CMS (Client
Management System) software, in order to decrease the bandwidth requirement without affecting the image quality,
channel-zero encoding is supported as an option for you.
Steps:
1. Enter the Live View Settings interface.
Menu> Configuration> Live View
2. Select the Channel-Zero Encoding tab.
3. Check the checkbox after Enable Channel-Zero Encoding.
4. Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
5. Click the Apply button to activate the settings.
After you set the Channel-Zero encoding, you can get a view in the remote client or web browser of 16 channels
in one screen.
Digital Video Recorder User Manual
Figure 3. 8 Live View- Channel-Zero Encoding
51
Advertisement
Table of Contents
