Table of Contents
Advertisement
of the DVR's). Or you can click the One-touch Adding button to add all cameras (with the same admin
password) from the list.
Make sure the camera to add has already been actiavted by setting the admin password, and the admin
password of the camera is the same with the DVR's.
4.
(For the encoders with multiple channels only) check the
shown in the following figure, and click OK to add multiple channels.
OPTION 2:
Steps:
1.
On the IP Camera Management interface, click the Custom Adding button to pop up the Add IP Camera
(Custom) interface.
2.
You can edit the IP address, protocol, management port, and other information of the IP camera to be added.
If the IP camera to add has not been actiavated, you can activate it from the IP camera list on the IP Camera
Management interface.
3.
Click Add to add the camera.
For the successfully added IP cameras, the Security status shows the security level of the password of
camera: strong password, weak password and risky password.
Digital Video Recorder User Manual
Figure 2. 23 Select Multiple Channels
Figure 2. 24 Custom Adding IP Camera Interface
40
checkbox
of Channel Port in the pop-up window, as
Advertisement
Table of Contents
