Table of Contents
Advertisement
Working with Native Matrix Mode
To activate the Native Matrix Mode:
You'll find all menus from the Mixer Mode in the main menu except some specific matrix function added.
To work with Native Matrix Mode, you have to use the Matrix # buttons first.
For instance, if you want to put the Frame #1 on the Output #1 and the Live source #3 on the output #2:
Press Matrix #1 button → Press Background Frame button → Press input #1
Press Matrix #2 button → Press Background live button → Press input #3
Don't forget to press the correct Matrix # button before pressing the Layer selection button, in order to be sure
doing the manipulation on the correct output.
Working with Cut, Fade or Transitions
All the transitions (Cut, Fade or Transitions) are available in the Native Matrix Mode. Although the Matrix
Mode is activated, you will be able to perform powerful transition effects seamlessly.
1 background live on each output → 2 scalers used
The background Frame and the Logos are not considered as live layers and are not counted as using a scaler.
Output selection settings
Same as Mixer Mode (Preview is replaced by output #2 in this case)
Capturing Still Frames
Same as Mixer Mode.
Working with Frames
Same as Mixer Mode
Mode Menu → Native Matrix mode menu
Press
[TAKE]
to view the result on both screens
→
2 seamless transitions
51
Advertisement
Table of Contents
Need help?
Do you have a question about the ops300 and is the answer not in the manual?