Upnp; Static Routing - Tenda F357 User Manual

Wireless N301 Easy Setup Router
simply entering http://tenda.dyndns.org in their browser address
bar.

4.4 UPNP

The Universal Plug and Play (UPnP) feature allows network devices,
such as computers from Internet, to access resources on local host
or devices as needed. UPnP-enabled devices can be discovered
automatically by the UPnP service application on the LAN. This
feature is enabled by default. No settings are required.
Enable UPnP: Check/uncheck to enable/disable the UPnP feature.
OK: Click to complete your settings.

4.5 Static Routing

When there are several routers in the network, you may want to set
up static routing. Static routing determines the path of the data in
your network. You can use this feature to allow users on different IP
domains to access the Internet via this device. It is not
recommended to use this setting unless you are familiar with static
routing. In most cases, dynamic routing is recommended, because
this feature allows the router to detect the physical changes of the
network layout automatically. If you want to use static routing, make
sure the router's DHCP function is disabled.
.
59