Table of Contents
Advertisement
For example:
As seen in the figure above, PC1 and PC2 access Internet via a
wireless connection to Router 1. While PC3 and PC4 are too far to
directly connect to Router 1 for Internet access. Now you can use
the WDS bridge feature to let PC3 and PC4 access Internet.
Before you get started:
1. View and note down the wireless security settings: security mode,
cipher type, security key, etc. on Router 1; Click Status>LAN
Settings and check the IP address.
2.Click Wireless>Wireless Basic Settings to check router one's
wireless basic settings.
Wireless N301 Easy Setup Router
44
.
Advertisement
Table of Contents
