Tenda F357 User Manual page 59

single port, enter the port number in both Start and End fields,
say, 21 for FTP). Contact corresponding service provider if you
don't know the port number of the service to use.
2. LAN IP: Specify the internal host's IP address. Be sure to statically
assign the host's IP address to make this function constant.
3. Protocol: Specify the protocol required for the service utilizing
the port(s).
4. Enable: Check to enable current settings.
5. OK: Click to activate your settings.
Now, your friends only need to enter ftp://xxx.xxx.xxx.xxx:21 in their
browsers to access your FTP server xxx.xxx.xxx.xxx is the router's
WAN IP address. Assuming it is 172.16.102.89, and then your friends
need to enter ftp://172.16.102.89：21 in their browsers.
For example: You want to share some large files with your friends
who are not in your LAN; however it is not convenient to transfer
such large files across network. Then, you can set up your own PC as
a FTP server and use the Port (Range) Forwarding feature to let your
friends access these files. Assuming that the static IP address of the
FTP server (Namely, your PC) is 192.168.0.10, you want your friends
to access this FTP server through default port of 21 using the TCP
protocol, then do as follows:
1. Start/End Port: Enter 21 in both Start Port and End Port fields.
2. LAN IP: Enter 192.168.0.10
3. Protocol: Select TCP.
4. Enable: Check to enable current settings.
5. OK: Click to activate your settings.
Wireless N301 Easy Setup Router
.
55