Table of Contents
Advertisement
Note:
When the settings finished, remember to enter an Internet
1.
Connection and set up the mode to the original.
Verify that the SSID, channel, and security mode on the page
2.
match those of the added wireless network. If not, manually
correct them.
For the normal wireless connection between two routers, do not
3.
change this router's SSID settings, including SSID, channel,
security mode and security key.
Universal Repeater Mode
In this mode, the router will relay data to an associated root AP and
AP function is enabled meanwhile. The wireless repeater relays
signal between its stations and the root AP for greater wireless
range. Steps are shown as below:
Click Wireless>Wireless Extender, select Universal Repeater in
1.
the extender mode and click Open Scan.
Wireless N301 Easy Setup Router
41
.
Advertisement
Table of Contents
