ICP DAS USA GW-7552 Quick Start User Manual page 5

Set the modules of the GW-7552
The modules of the GW-7552 are described below.
System setting module：2 byte out
●
Output module：Output Relay/Coil
●
Input module：Input Relay/Coil
●
In this example, we configure a "system setting module", an "Output
Relay/Coil--2 Byte module" and an "Input Relay/Coil--2 Byte module", as
follows.
Double click GW-7552's icon to
enter Slave configuration dialog
GW-7552 PROFIBUS/MODBUS GATEWAY Quick Start User Guide (Version 1.00)
Change Modbus type to
slave and click <OK> button
Output Register
Input Register
1~32 Bytes
1~64 Words
1~32 Bytes
1~64 Words
Configure module and click OK
button
PAGE：5